4N TE9006
90° end mills with unique 4 high positive helical cutting edges of doublesided 4NKT 06 inserts

4N TE90M06
90° modular end mills with FLEXTEC adaptation & unique four high positive helical cutting edges of doublesided 4NKT 06

4N TF90R06
90° face mills with unique 4 high positive helical cutting edges of doublesided 4NKT 06 inserts

2PTE9005
90° end mills with 2PKT inserts of high positive helical cutting edges

2PTE90M05
90° end mills with FLEXTEC modular adaptation & high positive helical cutting edges of 2PKT inserts

2PTF90R05
90° face mills with 2PKT inserts of high positive helical cutting edges

TE90APM17
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of APKT 17 inserts

TE90AP16
90° end mills with RHINOMILL of APKT 16 inserts

TE90AP17
90° end mills with high positive two helical cutting edges of APKT 17 inserts

TE90AP12
90° end mills with high positive two helical cutting edges of APKT 12 inserts

TE90APM12
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of APKT 12 inserts

TE90AXM06
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of AXMT 06 inserts

TE90AX06
90° end mills with high positive two helical cutting edges inserts of AXMT 06

2STE90AP19
90° end mills with strong APKT 19 inserts for roughing of heavy industry parts

2STE90AP09
90° end mills with high positive two helical cutting edges of APKT 09 inserts

2STE90APM09
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of APKT 09 inserts

TE90APM16
Modular 90° end mills with FLEXTEC modular adaptation and RHINOMILL of APKT 16 inserts

TE90XEVM16
Modular 90° end mills with FLEXTEC modular adaptation & high positive 2 helical cutting edges of XEVT 16 for aluminum

TE90XEV16/22
90° end mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining

TE90XEVHSK63A16
90° end mills with HSK shank & very high positive rake angle & helical cutting edges of XEVT 16 for aluminum machining

TEBL09
High feed end mills with BLMP 09 inserts of 4 cutting edges in max. ap 1.5 mm

TFM90XEVR16/22
90° face mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining

TEBLM09
High feed end mills with BLMP 09 inserts of 4 cutting edges and FLEXTEC modular adaptation in max. ap 1.5 mm

TEBLM13
High feed end mills with BLMP 13 inserts of 6 cutting edges and FLEXTEC modular adaptations

TEBLM06
High feed end mills with BLMP 06 inserts of 4 cutting edges and FLEXTEC modular adaptations in max. ap 1.0 mm

TEBL06
High feed end mills with BLMP 06 inserts of 4 cutting edges in max. ap 1.0 mm

TEBL13L
High feed end mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm

TESB...M09
High feed end mills with FLEXTEC modular adaptation and positive SBMT 09 of 4 cutting edges in max. ap 1.2 mm

TESB...M13
High feed end mills with FLEXTEC modular adaptation and positive SBMT 13 of 4 cutting edges in max. ap 2.0 mm

TESB...09L
High feed end mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm

TESB...13L
High feed end mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm

TFMBLR06
High feed face mills with BLMP 06 inserts of 4 cutting edges in max. ap 1.0 mm

TFMBLR09
High feed face mills with BLMP 09 inserts of 4 cutting edges in max. ap 1.5 mm

TFMBLR13
High feed face mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm

TFMSB...R09
High feed face mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm

TFMSB...R13
High feed face mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm

3P TE9010/15/19
90° end mills with high positive three helical cutting edges inserts of 3PKT 10/15/19

3P TE90M10/15/19
90° end mills with FLEXTEC modular adaptation & high positive three helical cutting edges of 3PKT 10/15/19 inserts

3P TE90M06
90° end mills with FLEXTEC modular adaptation & high positive three helical cutting edges of 3PKT 06 inserts

3P TE9006
90° end mills with high positive three helical cutting edges inserts of 3PKT 06

7SF45R06
45° face mills with positive 7 cutting edged inserts & less cutting forces

TERTM10/12
Modular end mills with FLEXTEC modular adaptation & RTM(H)X inserts of fiveindexing bottom for exotic materials

TERT10
End mills with RTM(H)X inserts of fiveindexing bottom for stainless steel and difficulttocut materials

TERY08/10/12/16/20
End mills with strong positive round inserts of RYM(H)X for general profiling

TERYM08/10/12/16
Modular end mills with FLEXTEC modular adaptation & strong positive round inserts of RYM(H)X for profiling

TERNSM10/12/16
Modular end mills with FLEXTEC modular adaptation and doublesided round inserts of RUMU for general profiling

TERNS10/12/16
End mills with doublesided round inserts of RNMU for general and Die & Mold application

TERPW12CH
End mills with dimple type negative round Ceramic inserts for nickel based super alloy & ductile cast iron

TFMRT10/12
Face mills with RTM(H)X inserts with fiveindexing bottom for stainless steel and difficulttocut materials

2F 16/20/25/30/32
Ball nose end mills for rough or semifinish profiling with one insert of both internal & external pockets 2FB

2F 16/20/25/30/32M
Ball nose end mills for rough or semifinish profiling with FLEXTEC modular adaptation with one insert of both sides

TFMRNSR10/12/16
Face mills with doublesided round inserts for general applications and various industries

TFMRYR08/10/12/16/20
Face mills with strong positive round inserts of RYM(H)X for general profiling

TE90XE16
90° end mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining

TE90XEM16
Modular 90° end mills with FLEXTEC modular adaptation & high positive 2 helical cutting edges of XECT 16 for aluminum

TFM90XER16
90° face mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining

TFMRXR10/12/16
Face mills with positive round inserts of RXM(H)X for general profiling

TFMRXR20
Face mills with positive round inserts of RXM(H)X for general profiling

TFMXDRO8
High feed face mills with XDMX 08 inserts of 2 cutting edges

TFMXDR13
High feed face mills with XDMX 13 inserts of 2 cutting edges

7SE4506
45° end mills with positive 7 cutting edged inserts & less cutting forces
  