Tungaloy Cutting Tools - Metal Working Tools - DIN69871-SRKIN (TungShrink) : 4504241 -

DIN69871-SRKIN (TungShrink) : TungShrink thermal shrinking holder for carbide and HSS with DIN69871 shank

Related solid for : DIN6987150SRKIN12X80

DSW-DE3
Solid carbide drill without coolant hole, L/D=3

DSW-DE5
Solid carbide drill without coolant hole, L/D=5

DSW-DI5
Solid carbide drill with coolant hole, L/D=5

DEB1000
T-DIA Endmill

TEFS-E44-CF
4 flute endmill, 38 deg helix angle, variable pitch, roughing and finishing combination type

TEFS-B44
4 flute endmill, 45 deg helix angle, roughing and finishing combination type

TEC-E4L-CF
4 flute endmill, 38 deg helix angle, variable pitch

TEC-E5L-CF
5 flute endmill, 38 deg helix angle, variable pitch

TECR-B4,5,7M
4-7 flute roughing endmill, 45 deg helix angle

TERF-A/E3,4
3-4 flute roughing endmill, 30 deg or 38 helix angle, for alloy steel and stainless steel

TEFF-N4
4 flute high feed endmill

TERC-E3
3 flute roughing endmill, 38 deg helix angle, for aluminium alloy and non-ferrous metal

TECR-B3
3 flute roughing endmill, 45 deg helix angle, relieved neck type, for aluminium machining

TEC-A4
4 flute endmill, 30 deg helix angle, for hardened steel up to 65 HRC

TECH-B6
6 flute endmill, 45 deg helix angle, for hardened steel up to 65 HRC

TEC-B6 (extra long)
6 flute endmill, 45 deg helix angle, extra long type, for hardened steel up to 65 HRC

TEC-D6
6 flute endmill, 50 deg helix angle, for hardened steel up to 65 HRC

TEC-A2-C
2 flute endmill, 30 deg helix angle

TEC-A/E3
3 flute endmill, 30 deg or 38 deg helix angle

TEC-A4 (economical)
4 flute endmill, 30 deg helix angle

TEC-A4 (extra long)
4 flute endmill, 30 deg helix angle, extra long neck type

TECC-A/B2
2 flute slotting endmill, 30 deg or 45 deg helix angle

TECC-B/E3
3 flute slotting endmill, 38 deg or 45 deg helix angle

TEC-B3
3 flute slotting endmill, 45 deg helix angle

TECC-A/B4
4 flute endmill, 30 deg or 45 deg helix angle

TEC-B4
4 flute endmill, 45 deg helix angle

TEC-B4-R
4 flute radius endmill, 45 deg helix angle

TECA-B2
2 flute slotting endmill, 45 deg helix angle, for aluminium machining

TECA-B3
3 flute endmill, 45 deg helix angle, for aluminium machining

TECA-H3-CF-R
3 flute endmill, 39 deg -41 deg variable helix, center cutting edge, for aluminium machining

TEAP-H3-CFR
3 flute endmill, variable helix, with chip splitter with coolant holes, relieved neck type, for aluminium machining

TECA-F2
2 flute slotting endmill, 55 deg helix angle, for aluminium machining

TEBRF-T3, 4
3 or 4 flute ball nose roughing endmill, 20 deg helix angle, long edge type, for hardened steel up to 55 HRC

TEB-A2-H
2 flute ball nose endmill, 30 deg helix angle, short type, for hardened steel with 55 to 70 HRC

TEB-A2 (long with neck)
2 flute ball nose rib processing endmill, 30 deg helix angle, for hardened steel up to 65 HRC

TEB-A2 (tapered neck)
2 flute ball nose endmill, tapered neck type, for hardened steel up to 65 HRC

TEB-A2 (short length)
2 flute ball nose endmill, 30 deg helix angle, short type

TEB-A2-E
Economical 2 flute ball nose endmill, 30 deg helix angle, economical short type

TEB-A3
3 flute ball nose endmill, 30 deg helix angle, short type

TEB-A4
4 flute ball nose endmill, 30 deg helix angle, short type

MTEC-ISO
Solid Carbide Internal Threading Endmills for ISO Thread Profile

MTECB-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes for ISO Thread Profile

MTECQ-ISO
Solid Carbide Threading Endmills with Internal Coolant Holes and a Reduced Diameter Neck for Deep Internal ISO Profile

MTECZ-ISO
Solid Carbide Internal Threading Endmills with Coolant Holes Located in the Flutes

MTECS-ISO
Small Diameter Solid Carbide Threading Endmills for Internal ISO metric Profile

MTECSH-ISO
Small Diameter Short Left-Hand Cutting Solid Carbide Internal ISO metric Profile, Threading Endmills for Hardened Steel

MTECD-ISO
Small Diameter Short Left-Hand Cutting Solid Carbide Endmills for Internal ISO metric Profile Drilling, Thread/Chamfer

MTECE-ISO
Solid Carbide External Threading Endmills for ISO metric Thread Profile

MTEC-UN
Solid Carbide Threading Endmills for Internal UN Thread Profile

MTECB-UN
Solid Carbide Threading Endmills with Coolant Holes for Internal UN Thread Profile

MTECZ-UN
Solid Carbide Threading Endmills with Coolant Holes Located in the Flutes for Internal UN Thread Profile

MTECS-UN
Small Diameter Solid Carbide UN Profile Threading Endmills for Steel

MTECSH-UN
Small Diameter Short Left-Hand Cutting Solid Carbide UN Profile Threading Endmills for Hardened Steel

MTECE-UN
Solid Carbide Threading Endmills with UN Form for External Threading

MTEC-W
Solid Carbide Threading Endmills for Internal or External BSP Thread Profile

MTECS-W
Short Solid Carbide Threading Endmills for Internal or External BSP and BSF Thread Profiles

MTEC-BSPT
Solid Carbide Threading Endmills for External or Internal BSPT Thread Profile

MTEC-NPT
Solid Carbide Threading Endmill without Coolant Holes for Internal or External NPT Threads

TEC-H4S-CF-E
4 flute chatter dampening endmill, variable helix and variable pitch, short type

TEC-H4M-CF-E
4 flute chatter dampening endmill, variable helix and variable pitch

TEC-H7-CF
7 flute chatter dampening endmill, variable helix and variable pitch, for high speed finishing

TEC-H-CF
6-20 flute chatter dampening endmill, variable helix and variable pitch, for high speed finishing

TECK-H4M-CF-R
4 flute chatter dampening endmill, variable helix and variable pitch, for titanium machining

TECK-H7/9-CFR
7 or 9 flute chatter dampening endmill, variable helix and variable pitch, for titanium machining

TEC-H4M-CF-R
4 flute chatter dampening endmill, variable helix and variable pitch

TEC-H4L-CF-R
4 flute chatter dampening endmill, variable helix and variable pitch, long neck type

TEC-H4X-CF-R
4 flute chatter dampening endmill, variable helix and variable pitch, extra long neck type

TEFS-B44-C
4 flute endmill, 45 deg helix angle, roughing and finishing combination type

TECP-H4L-CFR
4 flute roughing endmill, variable helix and variable pitch, with chip splitter, long overhang

TECL-B-4,6
4 or 6 flute endmill, 45 deg helix angle, long type

TECX-B-4,6
4 or 6 flute endmill, 45 deg helix angle, extra long type

TECA-H4-CF-R
4 flute endmill, variable helix and variable pitch, relieved neck type, for aluminium machining (1.5xD, 2xD)

TECA-H3-CF-R-C
3 flute endmill, variable helix, center cutting edge with coolant holes, for aluminium machining

TEB-E4L-CF
4 flute chatter dampening ball nose endmill, variable pitch, relieved neck type, for high hardened metal

TCFF-A3
3 flute solid Ceramic endmill for high feed rate

MTECI-A60
60 deg Partial Profile Solid Carbide Thread Mills for Internal and External Threads

Milling
Main Application

Shoulder Milling
Sub Application

Site Map:

Milling Main Application

Shoulder Milling Sub Application

Site Map:

Milling
Main Application

Shoulder Milling
Sub Application