Tungaloy Cutting Tools - Metal Working Tools - Milling - Shoulder Milling

DEB1000 : High speed T-DIA endmill for aluminium

Designation	order	DC	DCX	DCONMS	CCMS	CCTMS	CCFMS	CUBPMS	CZCMS	TCDCONMS	TBMSRK	ZEFF	ZEFP	NOF	FHA	CHW	KCH	RE	APMX	KAPR	RMPX	OAL	LF	LS	LH	LU	BHTA	HAND	BMC	WT (kg)	RPMX	CSP	CNSC	CXSC	Oil hole	LPR	LTA	WTA	ISYC	ClssID	GTC	Dc (old)	Ds	l	ls	L	GICAT	giic	Grade
DEB1040	10.0000~	4.00	4.00~	6.000	ZYL01F6000h$06~	ZYL~	01~	F~	6000~	h$06~	1.000~	1~	1~	1~	0.0~	-~	-~	-~	3.50	90.0~	-~	45.00~	45.00	32.0	13.0~	-~	-~	R~	D~	0.02~	-~	-~	0~	0~	without~	14.00~	14.00~	0.00~	303-01~	71E01A05D27A8~	MILSQS_MZYL01~	4.00~	6.0~	3.50~	32.0~	45.0~	6802965	1	DX140
DEB1050	20.0000~	5.00	5.00~	6.000	ZYL01F6000h$06~	ZYL~	01~	F~	6000~	h$06~	1.000~	1~	1~	1~	0.0~	-~	-~	-~	3.50	90.0~	-~	50.00~	50.00	35.0	15.0~	-~	-~	R~	D~	0.02~	-~	-~	0~	0~	without~	16.00~	16.00~	0.00~	303-01~	71E01A05D27A8~	MILSQS_MZYL01~	5.00~	6.0~	3.50~	35.0~	50.0~	6802966	1	DX140
DEB1060	30.0000~	6.00	6.00~	6.000	ZYL01F6000h$06~	ZYL~	01~	F~	6000~	h$06~	1.000~	1~	1~	1~	0.0~	-~	-~	-~	3.50	90.0~	-~	50.00~	50.00	35.0	15.0~	-~	-~	R~	D~	0.02~	-~	-~	0~	0~	without~	16.00~	16.00~	0.00~	303-01~	71E01A05D27A8~	MILSQS_MZYL01~	6.00~	6.0~	3.50~	35.0~	50.0~	6802967	1	DX140
DEB1080	50.0000~	8.00	8.00~	8.000	ZYL01F8000h$06~	ZYL~	01~	F~	8000~	h$06~	1.000~	1~	1~	1~	0.0~	-~	-~	-~	5.00	90.0~	-~	55.00~	55.00	37.0	18.0~	-~	-~	R~	D~	0.05~	-~	-~	0~	0~	without~	19.00~	19.00~	0.00~	303-01~	71E01A05D27A8~	MILSQS_MZYL01~	8.00~	8.0~	5.00~	37.0~	55.0~	6802968	1	DX140
DEB1100	70.0000~	10.00	10.00~	10.000	ZYL01G1000h$06~	ZYL~	01~	G~	1000~	h$06~	1.000~	1~	1~	1~	0.0~	-~	-~	-~	5.00	90.0~	-~	60.00~	60.00	40.0	20.0~	-~	-~	R~	D~	0.08~	-~	-~	0~	0~	without~	20.00~	20.00~	0.00~	303-01~	71E01A05D27A8~	MILSQS_MZYL01~	10.00~	10.0~	5.00~	40.0~	60.0~	6802969	1	DX140
DEB1120	90.0000~	12.00	12.00~	12.000	ZYL01G1200h$06~	ZYL~	01~	G~	1200~	h$06~	1.000~	1~	1~	1~	0.0~	-~	-~	-~	5.00	90.0~	-~	65.00~	65.00	45.0	20.0~	-~	-~	R~	D~	0.12~	-~	-~	0~	0~	without~	20.00~	20.00~	0.00~	303-01~	71E01A05D27A8~	MILSQS_MZYL01~	12.00~	12.0~	5.00~	45.0~	65.0~	6802970	1	DX140

As cutting edge is very sharp, please handle carefully.
Please keep the overhang length from milling chuck of tool as short as possible.
Please use the endmill on a machine with sufficient rigidity.

For cutting speed recommendations, click on the required grade number related to specific item geometry

Milling
Main Application

Shoulder Milling
Sub Application

Site Map:

Milling Main Application

Shoulder Milling Sub Application

Site Map:

Milling
Main Application

Shoulder Milling
Sub Application