DIN69880-HYDRO (TungHydro) : TungHydro hydaulic endmill chuck holders with DIN69880 shank
  DesignationStockSSDCONMSDCONWSBTEDBDLSCWSADJRGALBBD_2LSLFGICATGIREMgiic
  DIN6988030HYDRO20X89 N/A30. 30.00020.0038.0042.0085.037.0073.0068.0055.089.004559268 0
  DIN6988030HYDRO25X100 N/A30. 30.00025.0046.0050.0085.031.0078.0068.0055.0100.004559269 0
  DIN6988030HYDRO32X100 N/A30. 30.00032.0056.0060.0090.032.0078.0068.0055.0100.004559270 0
  DIN6988040HYDRO20X95 N/A40. 40.00020.0038.0042.00130.082.0073.0083.0063.095.004559271 0
  DIN6988040HYDRO25X95 N/A40. 40.00025.0046.0050.00130.076.0073.0083.0063.095.004559272 0
  DIN6988040HYDRO32X95 N/A40. 40.00032.0056.0060.0090.032.0078.0083.0063.095.004559273 0

Clamping wrench (wrench HYDRO HEX 4) should be ordered separately.
Note: Available are reduction sleeves for 12, 20, 25 and 32 mm bore diameters.
Chucking forces will significantly reduce if reduction sleeves are used (ordered separately).