TEC-H4S-CF-E : Short 4 flute endmills with different helix (35 deg & 37 deg) and variable pitch for chatter dampening, for very high material removal rates in roughing and finishing operations. Full slot milling up to 1XD.
  DesignationStockDCDCONMSCHWREAPMXLFshankGICATGIREMgiicGrade
  TEC060H4S-06C06CF-E50 Available6.006.0000.25-6.0050.00Cylindrical 3302404 1AH725 
  TEC060H4S-06C06CF-R02E50 Available6.006.000-0.206.0050.00Cylindrical 5623473 1AH725 
  TEC060H4S-06W06CF-E50 N/A6.006.0000.25-6.0050.00Weldon 3302406 1AH725 
  TEC080H4S-08C08CF-E63 Available8.008.0000.30-8.0063.00Cylindrical 3302411 1AH725 
  TEC080H4S-08C08CF-R04E63 Available8.008.000-0.408.0063.00Cylindrical 5623475 1AH725 
  TEC080H4S-08W08CF-E63 N/A8.008.0000.30-8.0063.00Weldon 3302412 1AH725 
  TEC100H4S-10C10CF-E66 Available10.0010.0000.40-10.0066.00Cylindrical 3302413 1AH725 
  TEC100H4S-10C10CFR.5E66 Available10.0010.000-0.5010.0066.00Cylindrical 5623477 1AH725 
  TEC100H4S-10W10CF-E66 N/A10.0010.0000.40-10.0066.00Weldon 3302414 1AH725 
  TEC120H4S-12C12CF-E73 Available12.0012.0000.50-12.0073.00Cylindrical 3302415 1AH725 
  TEC120H4S-12C12CF-R06E73 N/A12.0012.000-0.6012.0073.00Cylindrical 5623479 1AH725 
  TEC120H4S-12W12CF-E73 N/A12.0012.0000.50-12.0073.00Weldon 3302416 1AH725 
  TEC160H4S-16C16CF-E82 Available16.0016.0000.60-16.0082.00Cylindrical 3302417 1AH725 
  TEC160H4S-16W16CF-E82 Available16.0016.0000.60-16.0082.00Weldon 3302418 1AH725 
  TEC200H4S-20C20CF-E92 N/A20.0020.0000.60-20.0092.00Cylindrical 3302419 1AH725 
  TEC200H4S-20W20CF-E92 N/A20.0020.0000.60-20.0092.00Weldon 3302420 1AH725 


For cutting speed recommendations, click on the required grade number related to specific item geometry