TEC-H4M-CF-E : 4 flute endmills with different helix (35 deg & 37 deg ) and variable pitch for chatter dampening. Used for very high material removal rates roughing and finishing operations. Full slot milling-up to 2XD.
  DesignationStockDCDCONMSCHWAPMXLFshankGICATGIREMgiicGrade
  TEC060H4M-12C06CF-E57 Available6.006.0000.2512.0057.00Cylindrical 5667907 1AH725 
  TEC060H4M-12W06CF-E57 Available6.006.0000.2512.0057.00Weldon 5667908 1AH725 
  TEC080H4M-16C08CF-E63 Available8.008.0000.3016.0063.00Cylindrical 5667909 1AH725 
  TEC080H4M-16W08CF-E63 N/A8.008.0000.3016.0063.00Weldon 5667910 1AH725 
  TEC100H4M-20C10CF-E72 Available10.0010.0000.4020.0072.00Cylindrical 5667911 1AH725 
  TEC100H4M-20W10CF-E72 N/A10.0010.0000.4020.0072.00Weldon 5667912 1AH725 
  TEC120H4M-24C12CF-E83 Available12.0012.0000.5024.0083.00Cylindrical 5667913 1AH725 
  TEC120H4M-24W12CF-E83 N/A12.0012.0000.5024.0083.00Weldon 5667914 1AH725 
  TEC160H4M-32C16CF-E92 Available16.0016.0000.6032.0092.00Cylindrical 5667915 1AH725 
  TEC160H4M-32W16CF-E92 Available16.0016.0000.6032.0092.00Weldon 5667916 1AH725 
  TEC200H4M-40C20CF-E104 Available20.0020.0000.6040.00104.00Cylindrical 5667917 1AH725 
  TEC200H4M-40W20CF-E104 N/A20.0020.0000.6040.00104.00Weldon 5667918 1AH725 


For cutting speed recommendations, click on the required grade number related to specific item geometry