TEC-H4M-CF-R : 4 flute endmills with different helix (35 deg & 37 deg) and variable pitch for chatter dampening with assorted radii. Used for very high material removal rates roughing and finishing operations. Full slot milling-up to 2XD.
  DesignationStockDCDCONMSREAPMXRMPXLFshankGICATGIREMgiicGrade
  TEC060H4M-12C06CF-R02-57 N/A6.006.0000.2012.005.057.00Cylindrical 5622986 1AH725 
  TEC060H4M-12W06CF-R02-57 N/A6.006.0000.2012.005.057.00Weldon 5622987 1AH725 
  TEC080H4M-16C08CF-R04-63 Available8.008.0000.4016.005.063.00Cylindrical 5606820 1AH725 
  TEC080H4M-16W08CF-R04-63 N/A8.008.0000.4016.005.063.00Weldon 5622988 1AH725 
  TEC100H4M-20C10CF-R05-72 N/A10.0010.0000.5020.005.072.00Cylindrical 5606821 1AH725 
  TEC100H4M-20W10CF-R05-72 N/A10.0010.0000.5020.005.072.00Weldon 5622989 1AH725 
  TEC120H4M-24C12CF-R06-83 N/A12.0012.0000.6024.005.083.00Cylindrical 5622990 1AH725 
  TEC120H4M-24W12CF-R06-83 N/A12.0012.0000.6024.005.083.00Weldon 5622991 1AH725 
  TEC140H4M-28C14CFR0.7-83 N/A14.0014.0000.7028.005.083.00Cylindrical 5622992 1AH725 
  TEC140H4M-28W14CFR0.7-83 N/A14.0014.0000.7028.005.083.00Weldon 5622993 1AH725 
  TEC160H4M-32C16CF-R08-92 N/A16.0016.0000.8032.005.092.00Cylindrical 5622994 1AH725 
  TEC160H4M-32W16CF-R08-92 N/A16.0016.0000.8032.005.092.00Weldon 5622995 1AH725 
  TEC200H4M-40C20CF-R10-104 N/A20.0020.0001.0040.005.0104.00Cylindrical 5622996 1AH725 
  TEC200H4M-40W20CF-R10-104 N/A20.0020.0001.0040.005.0104.00Weldon 5622997 1AH725 
  TEC250H4M-50C25CF-R12-121 N/A25.0025.0001.2050.005.0121.00Cylindrical 5622998 1AH725 
  TEC250H4M-50W25CF-R12-121 N/A25.0025.0001.2050.005.0121.00Weldon 5622999 1AH725 


For cutting speed recommendations, click on the required grade number related to specific item geometry