TEC-H4X-CF-R : 4 flute long endmills with different helix (35 deg & 37 deg) and variable pitch for chatter dampening with relieved necks. Used for very high material removal rates roughing and finishing operations. Full slot milling-up to 2XD.
  DesignationStockDCDCONMSREAPMXRMPXLFLHshankGICATGIREMgiicGrade
  TEC060H4X-12/25C06CF-R02 Available6.006.0000.2012.005.061.0025.0Cylindrical 5623011 1AH725 
  TEC060H4X-12/25W06CF-R02 N/A6.006.0000.2012.005.061.0025.0Weldon 5623012 1AH725 
  TEC080H4X-16/32C08CF-R04 N/A8.008.0000.4016.005.068.0032.0Cylindrical 5623013 1AH725 
  TEC080H4X-16/32W08CF-R04 N/A8.008.0000.4016.005.068.0032.0Weldon 5623014 1AH725 
  TEC100H4X-20/40C10CF-R05 N/A10.0010.0000.5020.005.080.0040.0Cylindrical 5623015 1AH725 
  TEC100H4X-20/40W10CF-R05 Available10.0010.0000.5020.005.080.0040.0Weldon 5623016 1AH725 
  TEC120H4X-24/50C12CF-R06 Available12.0012.0000.6024.005.095.0050.0Cylindrical 5623017 1AH725 
  TEC120H4X-24/50W12CF-R06 N/A12.0012.0000.6024.005.095.0050.0Weldon 5623018 1AH725 
  TEC160H4X-32/64C16CF-R08 N/A16.0016.0000.8032.005.0115.0064.0Cylindrical 5623019 1AH725 
  TEC160H4X-32/64W16CF-R08 N/A16.0016.0000.8032.005.0115.0064.0Weldon 5623020 1AH725 
  TEC200H4X-40/75C20CF-R10 N/A20.0020.0001.0040.005.0125.0075.0Cylindrical 5623021 1AH725 
  TEC200H4X-40/75W20CF-R10 N/A20.0020.0001.0040.005.0125.0075.0Weldon 5623022 1AH725 


For cutting speed recommendations, click on the required grade number related to specific item geometry