TEC-H5M-CF-R : 5 flute endmills with different helix (36 - 38 deg) and variable pitch for chatter dampening with assorted radii. Used for very high material removal rates roughing and finishing operations. Full slot milling-up to 1XD.
  DesignationStockDCDCONMSREAPMXRMPXLFshankGICATGIREMgiicGrade
  TEC040H5M-09C06CF-R02-57 N/A4.006.0000.209.005.057.00Cylindrical 5623056 1AH725 
  TEC050H5M-11C06CF-R02-57 N/A5.006.0000.2011.005.057.00Cylindrical 5623057 1AH725 
  TEC060H5M-13C06CF-R02-57 N/A6.006.0000.2013.005.057.00Cylindrical 5623058 1AH725 
  TEC060H5M-13W06CF-R02-57 N/A6.006.0000.2013.005.057.00Weldon 5623059 1AH725 
  TEC080H5M-19C08CF-R04-63 N/A8.008.0000.4019.005.063.00Cylindrical 5606921 1AH725 
  TEC080H5M-19W08CF-R04-63 N/A8.008.0000.4019.005.063.00Weldon 5623060 1AH725 
  TEC100H5M-22C10CF-R05-72 N/A10.0010.0000.5022.005.072.00Cylindrical 5606922 1AH725 
  TEC100H5M-22W10CF-R05-72 N/A10.0010.0000.5022.005.072.00Weldon 5623061 1AH725 
  TEC120H5M-26C12CFR0.6-83 N/A12.0012.0000.6026.005.083.00Cylindrical 5623062 1AH725 
  TEC120H5M-26W12CF-R06-83 N/A12.0012.0000.6026.005.083.00Weldon 5623063 1AH725 
  TEC160H5M-32C16CF-R08-92 N/A16.0016.0000.8032.005.092.00Cylindrical 5623064 1AH725 
  TEC160H5M-32W16CF-R08-92 N/A16.0016.0000.8032.005.092.00Weldon 5623065 1AH725 
  TEC200H5M-38C20CF-R10-104 N/A20.0020.0001.0038.005.0104.00Cylindrical 5623066 1AH725 
  TEC200H5M-38W20CF-R10-104 N/A20.0020.0001.0038.005.0104.00Weldon 5623067 1AH725 


For cutting speed recommendations, click on the required grade number related to specific item geometry