BT-EM (endmill holder) : Screw locking endmill holders with BT shank
RUN OUT-5                                           TAPER TOLERANCE                                     HARDNESS-60                                         ROUGHNESS                                          

Related solid for : BT-EM (endmill holder) :


TEFS-E44-CF
Combination of Roughing and Finishing Solid Carbide Endmills with Variable Pitch for Chatter Free Milling


TECR-B4,5,7S
4-7 Flute, 45 deg Helix Short Length (1xD) Solid Carbide Roughing Endmills


TECR-B4,5,7M
4-7 Flute, 45 deg Helix Medium Length (2xD) Solid Carbide Roughing Endmills


TECR-B4,6MF
4 and 6 Flute, 45 deg Helix Medium Length Solid Carbide Roughing Endmills for Materials up to 65 HRc


TECR-B4,5,7L
4-7 Flute, 45 deg Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks


TECR-B4,5X
4-5 Flute, 45 deg Helix Solid Carbide Roughing Endmills with 4xD Relieved Necks


TECR-T4M
4 Flute, 20 deg Helix Medium Length Solid Carbide Roughing Endmills for High Stock Removal Rates


TECP-E3L
3 Flute, 38 deg Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges


TECP-E4L
4 Flute, 38 deg Helix Solid Carbide Roughing Endmills with 3xD Relieved Necks and Chip Splitting Cutting Edges


TEC-A2-W
Economical Type 2 Flute, 30 deg Helix Center Cutting Short Solid Carbide Endmills


TEC-A/E3 (short length)
Economical Type 3 Flute, 30 deg and 38 deg Helix, Center Cutting, Short Length Solid Carbide Endmills


TEC-B3 (short length)
Economical Type 3 Flute, 45 deg Helix, Center Cutting, Short Length Solid Carbide Endmills


TECS/TECCS-E3
3 Flute, 38 deg Helix Short Solid Carbide Slot / Drill Endmills with 3xD Relieved Necks and Chamfered Corners


TEB-A2-E
Economical Type 2 Flute, 30 deg Helix Short Solid Carbide Ball Nose Endmills


TEC-H4S-CF-E
Short 4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening


TEC-H4M-CF-E
4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening


TEC-H7-CF
7 Flute Endmills with Different Helix and Variable Pitch for Chatter Free High Speed Finish Milling


TECK-H4M-CF-R
Endmills with Different Helix, Chamfered Edges and Variable Pitch for Chatter Dampening on Titanium


TECK-H4M-CF-R-C
Endmills with Different Helix and Coolant Holes, Chamfered Edges and Variable Pitch for Chatter Dampening on Titanium


TECK-H7/9-CFR
7 and 9 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening on Titanium


TEC-H4M-CF-R
4 Flute Endmills with Different Helix and Variable Pitch for Chatter Dampening with Assorted Radii


TEC-H4L-CF-R
4 flute Endmills with 3xD Relieved Necks, Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening


TEC-H4X-CF-R
4 Flute Endmills with 4xD Relieved Necks, Assorted Radii, Different Helix and Variable Pitch for Chatter Dampening


TEC-H5M-CF-R
5 Flute Endmills with Different Helix (36 - 38 deg) and Variable Pitch for Chatter Dampening with Assorted Radii


TECP-H4L-CFR
4 Flute Solid Carbide Endmills with Different Helix, Variable Pitch and Chip Splitting Cutting Edges for Roughing


TECL-B-4,6
4 & 6 Flute, 45 deg Helix Long Solid Carbide Endmills


TECX-B-4,6
4 & 6 Flute, 45 deg Helix Extra Long Solid Carbide Endmills