DIN69871-HYDRO (TungHydro) : TungHydro hydaulic endmill chuck holders with DIN69871 shank
  DesignationStockSSDCONWSBTEDBDBD_2LFLBLB_2LSCWSADJRGAJCRKSGICATGIREMgiic
  DIN6987130HYDRO6X60 N/ASK30 6.0023.0026.0045.0060.0041.0025.0037.010.00M5 M12 4559276 0
  DIN6987130HYDRO16X90 N/ASK30 16.0034.0038.0045.0090.0071.0043.0052.010.00M12x1 M12 4559281 0
  DIN6987130HYDRO20X90 N/ASK30 20.0038.0042.0042.0090.0071.00-52.010.00M12x1 M12 4559283 0
  DIN6987140HYDRO6X68 N/ASK40 6.0023.0026.0050.0068.0049.0033.0037.010.00M5 M16 4559284 0
  DIN6987140HYDRO8X68 N/ASK40 8.0025.0028.0050.0068.0049.0033.0037.010.00M6 M16 4559285 0
  DIN6987140HYDRO10X72 N/ASK40 10.0027.0030.0050.0072.0053.0037.0042.010.00M8x1 M16 4559286 0
  DIN6987140HYDRO12X77 N/ASK40 12.0029.0032.0050.0077.0058.0042.0047.010.00M10x1 M16 4559287 0
  DIN6987140HYDRO14X77 N/ASK40 14.0030.0034.0050.0077.0058.0042.0047.010.00M10x1 M16 4559288 0
  DIN6987140HYDRO16X80 N/ASK40 16.0034.0038.0050.0080.0061.0043.0052.010.00M12x1 M16 4559289 0
  DIN6987140HYDRO18X80 N/ASK40 18.0036.0040.0050.0080.0061.0043.0052.010.00M12x1 M16 4559290 0
  DIN6987140HYDRO20X82 N/ASK40 20.0038.0042.0050.0082.0063.0047.0052.010.00M12x1 M16 4559291 0
  DIN6987140HYDRO25X117 N/ASK40 25.0046.0050.0063.00117.0098.0051.0058.010.00M16x1 M16 4559292 0
  DIN6987140HYDRO32X117 N/ASK40 32.0056.0060.0063.00117.0098.0056.0062.010.00M16x1 M16 4559293 0
  DIN6987150HYDRO6X68 N/ASK50 6.0023.0026.0080.0068.0049.0033.0037.010.00M5 M24 4559294 0
  DIN6987150HYDRO8X68 N/ASK50 8.0025.0028.0080.0068.0049.0033.0037.010.00M6 M24 4559295 0
  DIN6987150HYDRO10X72 N/ASK50 10.0027.0030.0080.0072.0053.0037.0042.010.00M8x1 M24 4559296 0
  DIN6987150HYDRO12X77 N/ASK50 12.0029.0032.0080.0077.0058.0042.0047.010.00M10x1 M24 4559297 0
  DIN6987150HYDRO14X77 N/ASK50 14.0030.0034.0080.0077.0058.0042.0047.010.00M10x1 M24 4559298 0
  DIN6987150HYDRO16X80 N/ASK50 16.0034.0038.0080.0080.0061.0045.0052.010.00M12x1 M24 4559299 0
  DIN6987150HYDRO18X80 N/ASK50 18.0036.0040.0080.0080.0061.0045.0052.010.00M12x1 M24 4559300 0
  DIN6987150HYDRO20X82 N/ASK50 20.0038.0042.0080.0082.0063.0047.0052.010.00M16x1 M24 4559301 0
  DIN6987150HYDRO25X87 N/ASK50 25.0046.0050.0080.0087.0068.0052.0058.010.00M16x1 M24 4559302 0
  DIN6987150HYDRO32X91 N/ASK50 32.0056.0060.0080.0091.0072.0056.0064.010.00M16x1 M24 4559303 0
  DIN6987140HYDRO20X64.5 N/ASK40 20.0040.0049.50-64.5045.00-52.010.00M16x1 M16 4559274 0

Clamping wrench (wrench HYDRO HEX 4) should be ordered separately.
Note: Available are reduction sleeves for 12, 20, 25 and 32 mm bore diameters.
Chucking forces will significantly reduce if reduction sleeves are used (ordered separately).