Tungaloy Cutting Tools - Metal Working Tools - Grade : AH710
EN
×
 
 
 

Grade : AH710

PVD coated grade for grooving, milling, drilling

PropertyValue
ISO Range - P/M/K(P05-P15)(M20-M35)(K15-K30)
ISO Range - N/S/H

PropertyValue




Cutting Speed for: ZFRM160R15-MJ AH710 - 6725898
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125130-220 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :190130-205 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :250130-180 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :220130-175 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :300130-210 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :200130-205 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :275130-180 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :300130-215 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :350130-210 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :200120-175 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :325120-210 m/min
M12Stainless steel and cast steel.Ferritic/martensitic :20040-100 m/min
M13Stainless steel and cast steel.Martensitic :24040-80 m/min
M14Stainless steel and cast steel.Austenitic :18040-70 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :18085-225 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :26085-225 m/min
K17Nodular cast iron (GGG)Ferritic :160100-200 m/min
K18Nodular cast iron (GGG)Pearlitic :250100-200 m/min
K19Malleable cast iron.Ferritic :13095-250 m/min
K20Malleable cast iron.Pearlitic :230100-180 m/min
S31High temp. alloys Fe based.Annealed :20020-40 m/min
S32High temp. alloys Fe based.Cured :28020-40 m/min
S33High temp. alloys. Ni or Co based.Annealed :25020-40 m/min
S34High temp. alloys. Ni or Co based.Cured :35020-40 m/min
S35High temp. alloys. Ni or Co based.Castr :32020-40 m/min
S36Titanium Ti alloys.:31040-80 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31040-80 m/min
H38Hardened steel.Hardened :56035-110 m/min
H39Hardened steel.Hardened :65435-110 m/min
H40Chilled cast iron.Cast :40035-110 m/min
H41Cast iron.Hardened :56035-110 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2020Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved