Tungaloy Cutting Tools - Metal Working Tools - Grade : GH330
EN
×
 
 
 

Grade : GH330

PVD coated grade

PropertyValue
ISO Range - P/M/K(P15-P30)(M15-M30)
ISO Range - H/S/N

PropertyValue




Cutting Speed for: TEEN32ZTR GH330 - 6807900
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125150-200 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :190150-200 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :250150-200 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :220150-200 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :30030-50 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :200150-200 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :275150-200 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :30030-50 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :35030-50 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :20030-50 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :32530-50 m/min
M12Stainless steel and cast steel.Ferritic/martensitic :200150-200 m/min
M13Stainless steel and cast steel.Martensitic :240150-200 m/min
M14Stainless steel and cast steel.Austenitic :180150-200 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2020Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved