HXN03-M-C : Super high feed milling endmills with TungFlex (Coolant direct to inserts)
|GAMP: Rake angle axial , GAMF: Rake angle radial
The standard cutting conditions table shows the conditions for standard shank type cutters.
Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.
For DC above 33 mm, slot milling, ramping or contouring is not recommended as chips may be re-cut.