Tungaloy Cutting Tools - Metal Working Tools - Milling - High-Feed Milling - EXN03
EN
×
 
 
 
  
EXN03 : Super high feed milling endmills with double sided inserts with 4 edges (Center-through coolant)
GAMP: Rake angle axial , GAMF: Rake angle radial
 
GAMP: Rake angle axial , GAMF: Rake angle radial
 
The standard cutting conditions table shows the conditions for standard shank type cutters.
Cutting conditions are generally limited by the rigidity and power of the machine and the rigidity of the workpiece. When setting the conditions, start from half of the values of the standard cutting conditions and then increase the value gradually while making sure the machine is running normally.
For DC above 33 mm, slot milling, ramping or contouring is not recommended as chips may be re-cut.

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2020Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved