Internal Turning - For Miniature machining - A/E-SVUCR/L - Tungaloy Cutting Tools - Metal Working Tools
EN
×
 
 
 
  
A/E-SVUCR/L : Screw-on boring bars, for Posi 35deg rhombic insert with 7 deg clearance
Right hand (R) shown.
 
Right hand (R) shown.
 
 WITH COOLANT HOLE
  DesignationHAND KAPR materialDMIN DCONMS WF LF LH H f2 GAMP GAMF RE SC EPSR AN CICT CSP Torque GICATGIREMgiic
  A12M-SVUCR08-D160 R 93.0~STEEL 16.0012.00011.00150.0030.011.05.500.0-8.00.40V ~35.0~7.0~1~With coolant hole 0.66849579 0
  A12M-SVUCL08-D160 L 93.0~STEEL 16.0012.00011.00150.0030.011.05.500.0-8.00.40V ~35.0~7.0~1~With coolant hole 0.66849580 0
  A25S-SVUCR16-D320 R 93.0~STEEL 32.0025.00019.00250.0045.023.06.500.0-5.00.80V ~35.0~7.0~1~With coolant hole 3.06849585 0
  A25S-SVUCL16-D320 L 93.0~STEEL 32.0025.00019.00250.0045.023.06.500.0-5.00.80V ~35.0~7.0~1~With coolant hole 3.06849586 0
  E12Q-SVUCR08-D180 R 93.0~CARBIDE 18.0012.00011.50180.00-11.05.500.0-8.00.40V ~35.0~7.0~1~With coolant hole 0.66849526 0
  E12Q-SVUCL08-D180 L 93.0~CARBIDE 18.0012.00011.50180.00-11.05.500.0-8.00.40V ~35.0~7.0~1~With coolant hole 0.66849527 0
  E25T-SVUCR16-D320 R 93.0~CARBIDE 32.0025.00019.00300.00-23.06.500.0-5.00.80V ~35.0~7.0~1~With coolant hole 3.06849532 0
  E25T-SVUCL16-D320 L 93.0~CARBIDE 32.0025.00019.00300.00-23.06.500.0-5.00.80V ~35.0~7.0~1~With coolant hole 3.06849533 0
When using a right or left hand insert, the right hand insert (R) is used for the left hand toolholders (SVUCL** type), and the left hand insert (L) is used for the right hand toolholders (SVUCR** type).
Torque:Recommended torque (Nm) for clamping.


Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2023Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved