Internal Turning - For 35deg Rhombic insert - A-SVJCR/L - Tungaloy Cutting Tools

A-SVJCR/L : Screw-on boring bars, for Posi 35deg rhombic insert with 7 deg clearance

Right hand (R) shown.

Designation	HAND	KAPR	material	DMIN	DCONMS	WF	LF	LH	H	GAMP	GAMF	RE	SC	EPSR	AN	CICT	CSP	Torque	GICAT
A12M-SVJCR08-D160	R	142.0~	STEEL	16.00	12.000	2.00	150.00	28.0	11.0	-5.0	-5.0	0.40	V ~	35.0~	7.0~	1~	With coolant hole	0.6	6849609
A12M-SVJCL08-D160	L	142.0~	STEEL	16.00	12.000	2.00	150.00	28.0	11.0	-5.0	-5.0	0.40	V ~	35.0~	7.0~	1~	With coolant hole	0.6	6849610
A16Q-SVJCR08-D200	R	142.0~	STEEL	20.00	16.000	2.00	180.00	35.0	15.0	-5.0	-5.0	0.40	V ~	35.0~	7.0~	1~	With coolant hole	0.6	6849611
A16Q-SVJCL08-D200	L	142.0~	STEEL	20.00	16.000	2.00	180.00	35.0	15.0	-5.0	-5.0	0.40	V ~	35.0~	7.0~	1~	With coolant hole	0.6	6849612

When using a right or left hand insert, the right hand insert (R) is used for the left hand toolholders (SVJCL** type), and the left hand insert (L) is used for the right hand toolholders (SVJCR** type).
Torque: Recommended torque (Nm) for clamping.

Internal Turning
Main Application

For 35deg Rhombic insert
Sub Application

Site Map:

Internal Turning Main Application

For 35deg Rhombic insert Sub Application

Site Map:

Internal Turning
Main Application

For 35deg Rhombic insert
Sub Application