Tungaloy Cutting Tools - Metal Working Tools - Internal Turning - - TBS1
TBS1 : 90 deg approarch angle with square shank
TBS1**T** shown.
TBS1**T** shown.
  DesignationDMIN WF HF LH B H LF RE CSP CNSC CXSC MIID Torque l s HAND L2 b h L1 Insert R/L GICATGIREMgiic
  TBS108T08 25.007.807. coolant hole 0~0~TP**0802** ~0.0~8.20~2.38~R ~25.0~7.80~7.80~9.0~8.0~8.0~40.0~0.40~TP**0802** ~R ~6807577 0
  TBS110T09 38.009.809.810. coolant hole 0~0~TP**0902** ~0.0~9.60~2.38~R ~38.0~9.80~9.80~10.0~10.0~10.0~50.0~0.40~TP**0902** ~R ~6807578 0
  TBS113T11 50.0012.8012.812. coolant hole 0~0~TP**1102** ~0.0~11.00~2.38~R ~50.0~12.80~12.80~12.0~13.0~13.0~60.0~0.40~TP**1102** ~R ~6807579 0
  TBS116C12 62.0015.8015.818. coolant hole 0~0~CP**1204** ~0.0~12.90~4.76~R ~62.0~15.80~15.80~18.0~16.0~16.0~80.0~0.80~CP**1204** ~R ~6807580 0
  TBS119C12 72.0018.8018.818. coolant hole 0~0~CP**1204** ~0.0~12.90~4.76~R ~72.0~18.80~18.80~18.0~19.0~19.0~95.0~0.80~CP**1204** ~R ~6807581 0
  TBS125C16 82.0024.8024.822.025.025.0125.001.20With coolant hole 0~0~CP**1605** ~0.0~16.10~5.56~R ~82.0~24.80~24.80~22.0~25.0~25.0~125.0~1.20~CP**1605** ~R ~6807582 0
Figures shown above are of 13 mm or smaller square shanks used for normal direction of rotation.
For the tools used for reverse direction of rotation, add H in the end of the designation. (Example: TBS308T08H)
Use left-hand inserts (L) for normal direction of rotation, and right-hand inserts (R) for reverse direction of rotation.

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2022Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved