Tungaloy Cutting Tools - Metal Working Tools - Grade : NS9530
EN
×
 
 
 

Grade : NS9530

New non-coated cermet. 1st recommendation grade NS 9530 provides excellent performance. Applicable fo or finishing to medium cutting.

PropertyValue
ISO Range - P/M/K(P30)(M30)(K20)
ISO Range - N/S/H

PropertyValue




Cutting Speed for: VBMT110302-PS NS9530 - 6998583
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125230-380 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :190200-330 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :250160-300 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :220190-320 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :300140-280 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :200160-300 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :275150-280 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :300140-230 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :350130-200 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :200160-280 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :325130-200 m/min
N21Aluminum-wrought alloy.Not cureable : 601000-2500 m/min
N22Aluminum-wrought alloy.Cured :100300-1000 m/min
N23Aluminum-cast, alloyed <12% Si.Not cureable : 75300-1000 m/min
N24Aluminum-cast, alloyed.Cured : 90200-600 m/min
N26Copper alloys >1% pb.Free cutting :110250-600 m/min
N27Copper alloys.Brass : 90180-400 m/min
N28Copper alloys.Electrolitic copper :100150-300 m/min
S31High temp. alloys Fe based.Annealed :20035-45 m/min
S32High temp. alloys Fe based.Cured :28025-35 m/min
S33High temp. alloys. Ni or Co based.Annealed :25025-30 m/min
S34High temp. alloys. Ni or Co based.Cured :35015-25 m/min
S35High temp. alloys. Ni or Co based.Castr :32020-30 m/min
S36Titanium Ti alloys.:31080-160 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31040-50 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2021Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved