Tungaloy Cutting Tools - Metal Working Tools - Grade : T6130
EN
×
 
 
 

Grade : T6130

New CVD grade for stainless steel turning. Complemetary grade to AH630. First recommended grade when higher wear resistance than AH630 is required

PropertyValue
ISO Range - P/M/K(M15-M30)
ISO Range - N/S/H

PropertyValue




Cutting Speed for: VBMT160408-PS T6130 - 6994745
ISOMaterialsMaterial DesignationMaterial ConditionCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125120-240 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :190100-210 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :25080-190 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :22090-200 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :30080-170 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :20080-190 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :27570-170 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :30060-160 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :35050-140 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :20080-170 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :32550-140 m/min
P12Stainless steel and cast steel.Ferritic/martensitic :200120-230 m/min
P13Stainless steel and cast steel.Martensitic :240120-230 m/min
M14Stainless steel and cast steel.Austenitic :180120-230 m/min
S31High temp. alloys Fe based.Annealed :20030-40 m/min
S32High temp. alloys Fe based.Cured :28030-40 m/min
S33High temp. alloys. Ni or Co based.Annealed :25030-40 m/min
S34High temp. alloys. Ni or Co based.Cured :35030-40 m/min
S35High temp. alloys. Ni or Co based.Castr :32030-40 m/min
S36Titanium Ti alloys.:31030-40 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31030-40 m/min

Site Map:

External Turning  Internal Turning  Grooving & Parting  Threading  Milling  Holemaking  Boring  Tooling System 

Terms of Use and Legal Disclaimer   Privacy Statement
© 2021Tungaloy Corporation Manufacturer of Metalworking Tools (Tungaloy.co.jp) All Rights Reserved