Grade : TT5515
PVD AlTiN coated grade on ultra-fine substrate for medium and high speed machining of alloy steel pre-hardened steel, stainless steel & exotic materials (45

PropertyValue
ISO Range - P/M/K(P10-P30)(M10-M30)(K10-K30)
ISO Range - H/S/N (H10-H30)(S10-S30)
HRA93
Coating TypePVD
Coating LayerAlTiCrN



Cutting Speed for: HES 2060T-R1.0 TT5515 - 6113063
ISOMaterialMaterial DescriptionMaterial ConditionCutting Speed Recommendations
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125260-280 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :190200-230 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :250160-220 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :220160-220 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :300140-180 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :200160-220 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :275120-180 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :300130-180 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :350140-180 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :200130-180 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :32570-120 m/min
M12Stainless steel and cast steel.Ferritic/martensitic :20080-150 m/min
M13Stainless steel and cast steel.Martensitic :24060-140 m/min
M14Stainless steel and cast steel.Austenitic :18060-120 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :18080-260 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :260130-240 m/min
K17Nodular cast iron (GGG)Ferritic :160150-270 m/min
K18Nodular cast iron (GGG)Pearlitic :25090-270 m/min
K19Malleable cast iron.Ferritic :130150-270 m/min
K20Malleable cast iron.Pearlitic :230140-240 m/min
S31High temp. alloys Fe based.Annealed :20020-40 m/min
S32High temp. alloys Fe based.Cured :28020-30 m/min
S33High temp. alloys. Ni or Co based.Annealed :25020-30 m/min
S34High temp. alloys. Ni or Co based.Cured :35020-30 m/min
S35High temp. alloys. Ni or Co based.Castr :32030-70 m/min
S36Titanium (pure):31030-70 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31030-70 m/min