Milling & Solid End mills
Facing


14D-F45XN-06
45° face mills with double-sided economical 14 cutting edges inserts of XN 06 for general applications


7S-F45-R-06
45° face mills with positive 7 cutting edged inserts & less cutting forces


7S-E45-06
45° end mills with positive 7 cutting edged inserts & less cutting forces


14D-F45XN-R-09
45° face mills with double-sided economical 14 cutting edges inserts of XN 09 for roughing of steels & cast irons


14D-F45XNW-R-09
45° face mills with wedge clamping of double-sided economical 14 cutting edges inserts XN 09 for cast iron milling


TFM45SNS-R-16
Heavy duty 45° face mills with double-sided 8 cutting edges inserts of SN 16 for roughing of steels and cast irons


TFM45SNS-R-16B-CA
Heavy duty 45° face mills with cartridges & 8 cutting edges inserts of SN 16 for roughing of steels and cast irons


TFM45SN-R-13
45° face mills with 8 cutting edges of double-sided square inserts SN 13 for general milling


TFM45AN-R-16
45° face mills with 4 positive helical cutting edges of double-sided inserts AN 16


TFM45HNS-R-10
45° face mills with double sided 12 cutting edges inserts HN 10 & screw clamping for general milling in max. ap 6.35 mm


LM60SC-R-21
60° face mills with unique wedge clamping of thicker positive strong inserts SCKN 21 for heavy machining in max. ap13 mm


LM60SC-R-27
60° face mills with unique wedge clamping of thicker positive strong inserts SCKN 27 for heavy machining in max. ap18 mm


TFM55AHNS-R-05
55 face mills with 12 cutting edges inserts of double sides & screw clamping type for general milling in max. ap 5.0 mm


TFM45HN-R-10
Fine pitched wedge clamp type 45° face mills with double sided 12 cutting edges inserts HN 10 for cast iron milling


TFM45SNW-R-16
Heavy duty 45° face mills with wedge clamp type & 8 cutting edges inserts of SN 16 for roughing of cast irons


TFM43OFS-R-05
43° face mills with high positive octagon inserts & simple screw clamping for general milling


TFM43ZOFW-R-07
Wedge clamping type 43° face mills with positive octagon inserts


TFM45SE-R-12/12F
45° face mills with positive 4 cutting edges of SEKT/HT 12 inserts


TE45SE-12
45° end mills with high positive SEKT 12 inserts of 4 cutting edges


TFM75SN-R-13
75° face mills with 8 cutting edges of double-sided square inserts SN 13


TFM75AP-R-17
75° face mills using other corners of APKT 17 inserts


2S-TFM90AP-R-19
90° face mills with strong APKT 19 inserts for roughing of heavy industry parts


2S-TE90AP-19
90° end mills with strong APKT 19 inserts for roughing of heavy industry parts


4N TE90-M-06
90° modular end mills with FLEXTEC adaptation & unique four high positive helical cutting edges of double-sided 4NKT 06


4N TE90-06
90° end mills with unique 4 high positive helical cutting edges of double-sided 4NKT 06 inserts


4N TF90-R-06
90° face mills with unique 4 high positive helical cutting edges of double-sided 4NKT 06 inserts


2P-TF90-R-05
90° face mills with 2PKT inserts of high positive helical cutting edges


6N TF90-R-04
90° face mills with positive six cutting edges of double -sided 6NKU 04 inserts


6N TF90-R-06/09
90° face mills with positive six cutting edges of double sided 6NGU 06/09 inserts


6N TF90-R-06/09(INCH BORE)
90° face mills with positive six cutting edges of double- sided 6NGU 06/09 inserts


3P TF90-R-06
90° face mills with high positive three helical cutting edges inserts of 3PKT 06


3P TF90-R-10/15/19
90° face mills with high positive three helical cutting edges inserts of 3PKT 10/15/19


3P TF90-R-15/19(INCH BORE)
90° face mills with high positive three helical cutting edges inserts of 3PKT 10/15/19 & inch bores


LM90SE-R-21
90° face mills with unique wedge clamping of positive strong inserts SEKX 21 for heavy machining in max. ap 19 mm


TPM-R-PL09
Plunging face mills with four helical cutting edges of PLNG 09 inserts for plunging & facing


TFM90SN-R-13
90° face mills with 8 cutting edges of double-sided square inserts SN 13


TFM88SN-R-13
88° face mills with 8 cutting edges of double-sided square inserts SN 13 for milling near to shoulders


TFMSB...-R-09
High feed face mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm


TFMSB...-R-13
High feed face mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm


TESB...-M-09
High feed end mills with FLEXTEC modular adaptation and positive SBMT 09 of 4 cutting edges in max. ap 1.2 mm


TESB...-M-13
High feed end mills with FLEXTEC modular adaptation and positive SBMT 13 of 4 cutting edges in max. ap 2.0 mm


TESB...-09-L
High feed end mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm


TESB...-13-L
High feed end mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm


TFMBL-R-13
High feed face mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm


TFM15HNS-R-10
High feed face mills with 12 cutting edges of double-sided HN 10 inserts for facing only


TFMBL-R-09
High feed face mills with BLMP 09 inserts of 4 cutting edges in max. ap 1.5 mm


TFMBL-R-06
High feed face mills with BLMP 06 inserts of 4 cutting edges in max. ap 1.0 mm


TE90XEV-M-16
Modular 90° end mills with FLEXTEC modular adaptation & high positive 2 helical cutting edges of XEVT 16 for aluminum


TE90XEV-16/22
90° end mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining


TE90XEV-HSK63A-16
90° end mills with HSK shank & very high positive rake angle & helical cutting edges of XEVT 16 for aluminum machining


TFM90XEV-R-16/22
90° face mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining


TFM90SD-R-05
90° face mills for small part machining with SDMT 05 inserts of 4 cutting edges


TFMRNS-R-10/12/16
Face mills with double-sided round inserts for general applications and various industries


TFMRY-R-08/10/12/16/20
Face mills with strong positive round inserts of RYM(H)X for general profiling


TFMRT-10/12
Face mills with RTM(H)X inserts with five-indexing bottom for stainless steel and difficult-to-cut materials


TFMRX-R-10/12/16
Face mills with positive round inserts of RXM(H)X for general profiling


TFMRX-R-20
Face mills with positive round inserts of RXM(H)X for general profiling


TFMRN-R-12CH
Face mills with dimple type negative round Ceramic inserts for nickel based super alloy & ductile cast iron


TFM90XE-R-16
90° face mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining


TFM90AN-R-16
90° face mills with 4 helical cutting edges of double-sided inserts AN 16


TFM90AN-R-11
90° face mills with 4 helical cutting edges of double-sided inserts AN 11


TFM90AP-R-12
90° face mills with high positive two helical cutting edges inserts of APKT 12


TFM90AP-R-16
RHINOMILL Face Mills for APKT 16 inserts


2S-TFM90AP-R-09
90° face mills with high positive two helical cutting edges of APKT 09 inserts


TFM90AP-R-17/17-B
90° face mills with high positive two helical cutting edges inserts of APKT 17


TFM90AX-R-06
90° face mills with high positive two helical cutting edges inserts of AXMT 06


TFM90SE-R-13
90° face mills with positve 4 cutting edges of SEMT/HT 13 inserts


TFM90SNS-12-QC
New quick change type cutters with adjustable pockets and precision ground SN 12 inserts for cast irons finishing


TFM90SNS-R-12
90° face mills with adjustable pockets and precision ground SN inserts for finishing of steels and cast irons


TQ90SNS-R-12
Ring type quick change cutters with adjustable pockets and precision ground SN 12 inserts for cast iron finishing


TFM45SN-13-QC
Quick change type 45° face mills with screw clamping of double-sided 8 cutting edges inserts SN 13 for cast irons


14D-F45XNW-09-QC
Quick change type 45° face mills with wedge clamping and double-sided 14 cutting edges inserts XN 09 for cast iron


SCRM90TN-R-18
90° face mills with six helical cutting edges of double- sided TNMX 18 inserts


SCRM90TN-R-22
Heavy duty 90° face mills with strong six cutting edges of double-sided TN 22 inserts


2P-TE90-05
90° end mills with 2PKT inserts of high positive helical cutting edges


2P-TE90-M-05
90° end mills with FLEXTEC modular adaptation & high positive helical cutting edges of 2PKT inserts


6N TE90-04
90° end mills with positive six cutting edges of double -sided 6NKU 04 inserts


6N TE90-M-04
90° end mills with FLEXTEC modular adaptation and positive six cutting edegs of double-sided 6NKU 04 inserts


3P TE90-10/15/19
90° end mills with high positive three helical cutting edges inserts of 3PKT 10/15/19


3P TE90-06
90° end mills with high positive three helical cutting edges inserts of 3PKT 06


3P TE90-M-06
90° end mills with FLEXTEC modular adaptation & high positive three helical cutting edges of 3PKT 06 inserts


3P TE90-M-10/15/19
90° end mills with FLEXTEC modular adaptation & high positive three helical cutting edges of 3PKT 10/15/19 inserts


6N TE90-06/09
90° end mills with positive six cutting edges of double- sided 6NGU 06/09 inserts


6N TE90-M-06/09
90° end mills with FLEXTEC modular adaptation and positive six cutting edegs of double-sided 6NGU inserts


LM45SE-R-15
45° face mills with wedge clamping of ISO SEKN 15 milling inserts


SCRM90TN-W-18
90° end mills with helical six cutting edges of double-sided TNMX 18 inserts


LM45SE-R-12
45° face mills with wedge clamping of ISO SEKN 12 milling inserts


LM45SD-R-12
45° face mills with wedge clamping of ISO SDKN 12 milling inserts


LM45SD-R-15
45° face mills with wedge clamping of ISO SDKN 15 milling inserts


LM75SP-R-15
75° face mills with wedge clamping of ISO SPKN 15 milling inserts


LM75SP-R-12
75° face mills with wedge clamping of ISO SPKN 12 milling inserts


LM90TP-R-22
90° face mills with wedge clamping of ISO TPKN 22 milling inserts


SCRM90TN-M-18
90° end mills with FLEXTEC modular adaptation & helical six cutting edges of double-sided TNMX 18 inserts


TEBL-M-09
High feed end mills with BLMP 09 inserts of 4 cutting edges and FLEXTEC modular adaptation in max. ap 1.5 mm


TEBL-M-13
High feed end mills with BLMP 13 inserts of 6 cutting edges and FLEXTEC modular adaptations


TEBL-09
High feed end mills with BLMP 09 inserts of 4 cutting edges in max. ap 1.5 mm


TEBL-13-L
High feed end mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm


TEBL-M-06
High feed end mills with BLMP 06 inserts of 4 cutting edges and FLEXTEC modular adaptations in max. ap 1.0 mm


TEBL-06
High feed end mills with BLMP 06 inserts of 4 cutting edges in max. ap 1.0 mm


TE90AX-M-06
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of AXMT 06 inserts


TE90AX-06
90° end mills with high positive two helical cutting edges inserts of AXMT 06


TE90AP-M-16
Modular 90° end mills with FLEXTEC modular adaptation and RHINOMILL of APKT 16 inserts


TE90AP-M-17
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of APKT 17 inserts


TE90AP-16
90° end mills with RHINOMILL of APKT 16 inserts


TE90AP-17
90° end mills with high positive two helical cutting edges of APKT 17 inserts


2S-TE90AP-09
90° end mills with high positive two helical cutting edges of APKT 09 inserts


2S-TE90AP-M-09
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of APKT 09 inserts


TE90AP-M-12
90° end mills with FLEXTEC modular adaptation & high positive two helical cutting edges of APKT 12 inserts


TE90AP-12
90° end mills with high positive two helical cutting edges of APKT 12 inserts


TE90AN-M-16
90° modular end mills with FLEXTEC adaptation & four helical cutting edges of double-sided inserts AN 16


TE90AN-16
90° end mills with four helical cutting edges of double-sided inserts AN 16


TE90AN-M-11
90° modular end mills with FLEXTEC adaptation & four helica l cutting edges of double-sided inserts AN 11


TE90AN-11
90° end mills with four helical cutting edges of double-sided inserts AN 11


TERNS-M-10/12/16
Modular end mills with FLEXTEC modular adaptation and double-sided round inserts of RUMU for general profiling


TERNS-10/12/16
End mills with double-sided round inserts of RNMU for general and Die & Mold application


TERY-M-08/10/12/16
Modular end mills with FLEXTEC modular adaptation & strong positive round inserts of RYM(H)X for profiling


TERY-08/10/12/16/20
End mills with strong positive round inserts of RYM(H)X for general profiling


TPM-M-PL09
Plunging mills with FLEXTEC modular adaptation & 4 helical cutting edges of PLNG 09 inserts for plunging & facing


TPM-PL09
Plunging mills with four helical cutting edges of PLNG 09 inserts for rough plunging & facing


TE90XE-16
90° end mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining


TE90XE-M-16
Modular 90° end mills with FLEXTEC modular adaptation & high positive 2 helical cutting edges of XECT 16 for aluminum


TERT-10
End mills with RTM(H)X inserts of five-indexing bottom for stainless steel and difficult-to-cut materials


TERX-10/12/16/20
End mills with positive round inserts of RXM(H)X for general profiling


TFMXD-R-O8
High feed face mills with XDMX 08 inserts of 2 cutting edges


TFMXD-R-13
High feed face mills with XDMX 13 inserts of 2 cutting edges


TE90SD-05-C
90° end mills for small part machining with SDMT 05 inserts of 4 cutting edges


TE90SD-M-05
Modular 90 end mills with FLEXTEC adaptation & positive square inserts SDMT 05 of 4 cutting edges


TERD-M-05/07
Modular end mills with FLEXTEC modular adaptation & positive round inserts for profiling


TERP-W-12CH
End mills with dimple type negative round Ceramic inserts for nickel based super alloy & ductile cast iron


TERT-M-10/12
Modular end mills with FLEXTEC modular adaptation & RTM(H)X inserts of five-indexing bottom for exotic materials


TERX-M-10/12/16
Modular end mills with FLEXTEC modular adaptation & positive round inserts for profiling


TEXD-M-08/13
High feed end mills with XDMX inserts of 2 cutting edges & FLEXTEC modular adaptations


TEXD-08
High feed end mills with XDMX 08 inserts of 2 cutting edges


TEXD-13
High feed end mills with XDMX 13 inserts of 2 cutting edges