CNR/L : Internal threading bars, Alternative clamping of screw-on or clamp-on (DT type only)
Right hand (R),Tsuppari-Ichiban shank type shown.
  DesignationStockR/LmaterialDmDsfL1L2L3hbthetaLe
(deg)
GICATGIREMgiic
  TCNR0020R16DT AvailableR TSUPPARI 24.020.014.00200.030.049.018.00.01516815428 0
  TCNR0025S16DT AvailableR TSUPPARI 29.025.016.50250.038.064.023.00.01516815429 0
  TCNR0025S22DT AvailableR TSUPPARI 30.025.018.20250.038.064.023.00.01516815430 0
  CNR0020P16 AvailableR STEEL 24.020.014.00170.030.00.018.019.01516802364 0
  CNL0020P16 AvailableL STEEL 24.020.014.00170.030.00.018.019.01516801906 0
  CNR0025R16 AvailableR STEEL 29.025.016.50200.038.00.023.024.01516802365 0
  CNL0025R16 AvailableL STEEL 29.025.016.50200.038.00.023.024.01516801907 0
  CNR0032S16 AvailableR STEEL 37.032.020.10250.048.00.030.031.01516802367 0
  CNL0032S16 AvailableL STEEL 37.032.020.10250.048.00.030.031.01516801909 0
  CNR0025R22 AvailableR STEEL 30.025.018.20200.038.00.023.024.01516802366 0
  CNL0025R22 AvailableL STEEL 30.025.018.20200.038.00.023.024.01516801908 0
  CNR0032S22 AvailableR STEEL 38.032.021.90250.048.00.030.031.01516802368 0
  CNL0032S22 AvailableL STEEL 38.032.021.90250.048.00.030.031.01516801910 0
  CNR0040T27 AvailableR STEEL 46.040.026.90300.060.00.037.038.51016802369 0

A clamp set for CNR/L type toolholders consists of a clamp and a clamping screw.
A shim set for CNR/L type toolholders consists of a shim and a shim fixing screw.
Standard shims for CNR/L type toolholders are commonly used for right and left hand toolholders.
The right hand insert (IR) is used for the right hand toolholder (CNR...) and left hand insert (IL) is used for left hand toolholder (CNL...).