DIN69871-ODP : T-FLEXTEC threaded adaptation tools with DIN69871 form ADB taper shanks
IT_BALANCE_20000 RPM                                IT_BALANCE GRADE                                    IT_RUN-OUT A0.003                                   IT_TAPER SHANK GRADE                                IT_SURFACE HARDNESS 58~60HRC                        IT_N5                                              
  DesignationSSTsiD1D2LL1L3GkgGICATGIREMgiic
  DIN69871 40 ODP 6X58 40 M06 9.8013.0058.0038.932.00M16 0.824651327 0
  DIN69871 40 ODP 6X98 40 M06 9.8023.0098.0078.974.00M16 0.914651328 0
  DIN69871 40 ODP 8X58 40 M08 13.1015.0058.0038.932.00M16 0.824651329 0
  DIN69871 40 ODP 8X98 40 M08 13.1023.0098.0078.974.00M16 0.924651330 0
  DIN69871 40 ODP 10X58 40 M10 18.0020.0058.0038.932.00M16 0.844651331 0
  DIN69871 40 ODP 10X98 40 M10 18.0028.0098.0078.974.00M16 1.004651332 0
  DIN69871 40 ODP 12X58 40 M12 21.0024.0058.0038.934.00M16 0.884651333 0
  DIN69871 40 ODP 12X98 40 M12 21.0031.0098.0078.975.00M16 1.074651334 0
  DIN69871 40 ODP 16X58 40 M16 29.0028.0058.0038.933.00M16 0.914651335 0
  DIN69871 40 ODP 16X98 40 M16 29.0034.0098.0078.975.00M16 1.154651336 0
  DIN69871 50 ODP12X 78   50 M12 23.0030.0078.0058.950.00M24 2.744605098 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP12X128   50 M12 23.0040.00128.00108.9100.00M24 3.144605099 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP12X178   50 M12 23.0040.00178.00158.9150.00M24 3.564605100 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP12X228   50 M12 23.0046.00228.00208.9200.00M24 4.144605101 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X 78   50 M16 29.0034.0078.0058.950.00M24 2.964605102 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X128   50 M16 29.0040.00128.00108.9100.00M24 3.204605103 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X178   50 M16 29.0055.00178.00158.9150.00M24 4.084605104 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X228   50 M16 29.0055.00228.00208.9200.00M24 4.644605105 Balance to G6.3 at 12,000RPM 0

If the B type option is required, the plug screw must be removed from the flange cooling hole (Use a 2mm hex key)