DIN69871-ODP : T-FLEXTEC threaded adaptation tools with DIN69871 form ADB taper shanks
IT_BALANCE_20000 RPM                                IT_BALANCE GRADE                                    IT_RUN-OUT A0.003                                   IT_TAPER SHANK GRADE                                IT_SURFACE HARDNESS 58~60HRC                        IT_N5                                              
  DesignationSSTsiD1D2LL1L3GkgGICATGIREMgiic
  DIN69871 40 ODP 16X58 40M1629.0028.0058.0038.933.00M160.914651335 0
  DIN69871 40 ODP 16X98 40M1629.0034.0098.0078.975.00M161.154651336 0
  DIN69871 50 ODP16X 78   50M1629.0034.0078.0058.950.00M242.964605102 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X128   50M1629.0040.00128.00108.9100.00M243.204605103 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X178   50M1629.0055.00178.00158.9150.00M244.084605104 Balance to G6.3 at 12,000RPM 0
  DIN69871 50 ODP16X228   50M1629.0055.00228.00208.9200.00M244.644605105 Balance to G6.3 at 12,000RPM 0

If the B type option is required, the plug screw must be removed from the flange cooling hole (Use a 2mm hex key)