HSK A-SEM : ISO 3937 Face mill arbors with coolant holes & HSK DIN 69893 form A taper shanks

Related tool for : HSK A-SEM :


3P TF90-R-10/15/19
90° Face mills with high positive three helical cutting edges inserts of 3PK(H)T 10/15/19


TFM75SN-R-13
75° Face mills with 8 cutting edges of double-sided square inserts SN 13


TFM45SN-R-13
45° Face mills with 8 cutting edges of double-sided square inserts SN 13 for general milling


TPM-R-PL09
Plunging face mills with four helical cutting edges of PLNG 09 inserts for plunging & facing


TFMBL-R-09
High feed mills with BLMP 09 inserts of 4 cutting edges in maximum depth of cut ap 1.5 mm


3P TF90-R-06
90° Face mills with high positive three helical cutting edges inserts of 3PK(H)T 06


TES-AP12
Extended flute shell mills with helical two cutting edges inserts of APKT 12


TES-AP17
Extended flute shell mills with helical two cutting edges inserts of AP.. 17


TFM43OFS-R-05
43° Face mills with high positive octagon inserts & simple screw clamping for general milling


TFM45SE-R-12/12F
45° Face mills with positive 4 cutting edges of SEKT/HT 12 inserts


TFM75AP-R-17
75° Face mills using other corners of APKT 17 inserts


TFM90AP-R-17/17-B
90° Face mills with high positive two helical cutting edges inserts of AP.. 17


TFM90SE-R-13
90° Face mills with positve 4 cutting edges of SEMT/HT 13 inserts


TFMXD-R-13
High feed face mills with XDMX 13 inserts of 2 cutting edges & maximum depth of cut 2.0 mm


MTFLE D
External multi-insert threading shell mills


TMTSRH (helical shell mill)
Shell mills with coolant holes for helical threading inserts


TFM90AP-R-12
90° Face mills with high positive two helical cutting edges inserts of APKT 12


TFM90AX-R-06
90° Face mills with high positive two helical cutting edges inserts of AXMT 06


TFMRN-R-12CH
Face mills with dimple type negative round Ceramic inserts for machining of nickel based superalloy & ductile cast iron


TFMRX-R-10/12/16
Face mills with positive round inserts of RXM(H)X for general profiling & general machining


TFMRX-R-20
Face mills with positive round inserts of RXM(H)X for general profiling


LM90SE-R-21
90° Face mills with unique wedge clamping of positive strong inserts SEKX 21 for heavy machining in max. ap 19 mm


TFMXD-R-O8
High feed face mills with XDMX 08 inserts of 2 cutting edges & maximum depth of cut 1.0 mm


TFM90SD-R-05
90° Face mills for small part machining with SDMT 05 inserts of 4 cutting edges


TES-11/14
Extended flute shell mill with positive SPMT or SPMG 11/14 inserts of 4 cutting edges


2P-TF90-R-05
90° Face mills with 2PKT inserts of high positive helical cutting edges


TFM90AN-R-16
90° Face mills with 4 helical cutting edges of double-sided inserts AN 16


TFM43ZOFW-R-07
Wedge clamping type 43° Face mills with positive octagon inserts


SCRM90TN-R-22
Heavy duty 90° face mills with strong six cutting edges of double-sided TN 22 inserts


TFM55AHNS-R-05
55 face mills with 12 cutting edges inserts of double sides & screw clamping type for general milling in max. ap 5.0 mm


TFM90SNS-R-12
90° Face mills with adjustable pockets and precision ground wiper SN 12 inserts for finishing of steels and cast irons


TFM45HNS-R-10
45° Face mills with double sided 12 cutting edges inserts HN 10 & screw clamping for general milling in max. ap 6.35 mm


TFM15HNS-R-10
High feed face mills with 12 cutting edges of double-sided HN 10 inserts for facing only


TFM45HN-R-10
Fine pitched wedge clamp type 45° face mills with double sided 12 cutting edges inserts HN 10 for cast iron milling


LM75SP-R-12
75° Face mills with wedge clamping of ISO SPKN 12 milling inserts


LM75SP-R-15
75° Face mills with wedge clamping of ISO SPKN 15 milling inserts


LM90TP-R-22
90° Face mills with wedge clamping of ISO TPKN 22 milling inserts


TFM88SN-R-13
88° Face mills with 8 cutting edges of double-sided square inserts SN 13 for milling near to shoulders


TFM90SN-R-13
90° Face mills with 8 cutting edges of double-sided square inserts SN 13 for general milling


TFMBL-R-06
High feed mills with BLMP 06 inserts of 4 cutting edges in maximum depth of cut ap 1.0 mm


TFM45SNS-R-16
Heavy duty 45° face mills with double-sided 8 cutting edges inserts of SN 16 for roughing of steels and cast irons


TFM45SNS-R-16B-CA
Heavy duty 45° face mills with cartridges & 8 cutting edges inserts of SN 16 for roughing of steels and cast irons


TFM45SNW-R-16
Heavy duty 45° face mills with wedge clamp type & 8 cutting edges inserts of SN 16 for roughing of cast irons


LM45SE-R-12
45° Face mills with wedge clamping of ISO SEKN 12 milling inserts


TFMRY-R-08/10/12/16/20
Face mills with strong positive round inserts of RYM(H)X for general profiling & general machining


TFMRNS-R-10/12/16
Face mills with double-sided round inserts for general applications and various industries


LM60SC-R-21
60° Face mills with unique wedge clamping & thicker positive strong inserts SCKN 21 for heavy machining in max. ap13 mm


LM60SC-R-27
60° Face mills with unique wedge clamping & thicker positive strong inserts SCKN 27 for heavy machining in max. ap18 mm


TFM90XE-R-16
90° Face mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining


6N TF90-R-06/09
90° Face mills with positive six cutting edges of double sided 6NGU 06/09 inserts for cost effective machining


TSM...FF...-Z
Fixed pocket flange type slotting cutters with ZNHT inserts


TSM...FF...-ZN08/11
Fixed pocket flange type slotting cutters with ZNHU inserts


TSM...FF-S/W-ZN08/11/14
Adjustable slotting cutters with ZNHU inserts in flange type


14D-F45XN-R-09
45° Face mills with double-sided economical 14 cutting edges inserts of XN 09 for roughing of steels & cast irons


14D-F45XNW-R-09
45° Face mills with wedge clamping of double-sided economical 14 cutting edges inserts XN 09 for cast iron milling


2S-TFM90AP-R-09
90° Face mills with high positive two helical cutting edges of APKT 09 inserts


TES-AN11
Extended flute shell mills with 4 helical cutting edges of double-sided inserts AN 11


TFM90AN-R-11
90° Face mills with 4 helical cutting edges of double-sided inserts AN 11


TES-AN16
Extended flute shell mills with 4 helical cutting edges of double-sided inserts AN 16


TFM45AN-R-16
45° Face mills with 4 positive helical cutting edges of double-sided inserts AN 16


4N TF90-R-06
90° Face mills with unique 4 high positive helical cutting edges of double-sided 4NK(H)T 06 inserts


3P TES-10
Extended flute shell mills with 3PKT 10 inserts of positive 3 helical cutting edges


3P TES-15
Extended flute shell mills with 3PKT 15 inserts of positive 3 helical cutting edges


3P TES-19
Extended flute shell mills with 3PKT 19 inserts of positive 3 helical cutting edges


2S-TFM90AP-R-19
90° Face mills with strong APKT 19 inserts for roughing of heavy industry parts


6N TF90-R-04
90° Face mills with economical positive six cutting edges of double-sided 6NKU 04 inserts for general machining


TES-TN18
Extended flute shell mills with helical 6 cutting edges TNMX 18 inserts


TFM90XEV-R-16/22
90° Face mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining


14D-F45XN-R-06
45° Face mills with double-sided economical 14 cutting edges inserts of XN 06 for general applications


TSM...R-TS16(FLANGE TYPE)
Shallow groove milling tools with precision ground 3-edged inserts for internal and external applications


SCRM90TN-R-18
90° Face mills with six helical cutting edges of double- sided TNMX 18 inserts


TFMBL-R-13
High feed face mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm


TFMSB...-R-13
High feed face mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm


7S-F45-R-06
45° Face mills with positive 7 cutting edged inserts & less cutting forces


TFMSB-R-09
High feed face mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm


FPW HE..
Front piece part for extended flute shell mills with APMT & SPMT inserts


TFMRT-10/12
Face mills with RTM(H)X inserts of five-indexing bottom for stainless steel and difficult-to-cut materials machining


TFM90AP-R-16
90° Face Mills for APKT 16 inserts of RHINOMILL


MTF D (MULTI)
Indexable multi-insert shell mills for large diameter threading


4W-TF90-R-12
Face mills with periphery ground precisie wiper inserts for super finishing of various materials


12D-TF45-R-06
45° Face mills with reinforced 12 cutting edges inserts of high positive angle for general milling in max. ap 3.0 mm


12D-TF45-R-10
45° Face mills with reinforced 12 cutting edges inserts of high positive angle for general milling in max. ap 5.0 mm


14D-F45XNH-06
45° Face mills with carbide shim and 14 cutting edges inserts of XN 06 for roughing and finishing of difficult-to-cut


14D-F45XNH-09
45° Face mills with carbide shim and 14 cutting edges inserts of XN 09 for roughing of difficult-to-cut material


TFMBL-R-11
High feed mills with BLMP 11 inserts of 4 cutting edges in maximum depth of cut ap 2.0 mm


TFMPT-R-05
High Feed mills with PTKU 05 inserts of economical 10 cutting edges in maximum depth of cut ap 1.5 mm


TFM65PT-R-05
65° Face mills of economical 10 cutting edges inserts with high positive rake angles for general milling in max. ap 3.3


TFMPT-R-10
High Feed mills with PTKU 10 inserts of economical 10 cutting edges in maximum depth of cut ap 3.0 mm


TFM65PT-R-10
65° Face mills of economical 10 cutting edges inserts with high positive rake angles for general milling in max. ap 6.5


4S-TES-R-11V
Extended flute shell mills for exotic material machining with unique rigid V-bottom positive square SVK(H)T inserts


2P-TF90-R-07
90° Face mills with 2PKT inserts of high positive helical cutting edges


4N TF90-R-04
90° Face mills with unique four high positive helical cutting edges of double-sided 4NKT 04 inserts


4N TF90-R-09
90° Face mills with unique four high positive helical cutting edges of double-sided 4NK(H)T 09 inserts


4N TF90-R-11
90° Face mills with unique four high positive helical cutting edges of double-sided 4NKT 11 inserts


4N TF90-R-14
90° Face mills with unique four high positive helical cutting edges of double-sided 4NKT 14 inserts


8D-TF90-R-07
90° Face mills with 8 cutting edges of double-sided Square inserts SQ 07 for general milling


8D-TF90-R-12
90° Face mills with 8 cutting edges of double-sided Square inserts SQ 12 for general milling


TFMBN-R-09CH
High Feed mills with Dimple negative Ceramic inserts of four cutting edges for high speed machining of super alloys


TFMBN-R-12
High Feed mills with negative Ceramic inserts of 6 cutting edges & air holes for high speed machining of super alloys


TFMRY H-R-16/20
Carbide shim type face mills with strong positive round inserts of RYM(H)X for general profiling & general machining


4T-TF90-R-09
90° Face mills with strong four cutting edges of tangential LNK(H)U 09 inserts


4T-TF90-R-14
90° Face mills with strong four cutting edges of tangential LNKU 14 inserts


4T-TES-14
Extended flute shell mills with strong tangential LPK(H)U 14 inserts of four cutting edges