× Login Information
  
CEM 2 (Solid type) : 2 flute solid carbide end mills for 45° chamfering, countersinking & spot drilling
 
 
 EM FLUTES_2                                        EM HELIX ANGLE_30
  DesignationTool sty DC OAL APMX DCONMS FHA Shank RMPX fz
(min)
fz
(max)
NOF ClssID LTA GICATGIREMgiicGICODETough ‹————› Hard
Grade & Vc     Click on grade for cutting speed value
  CEM 2040 SOLID TYPE ~4.0070.006.006.0030.0~C ~0.00~0.0200.0502~71E01A05D27A8 ~17.50~6230021 2 UF10 TT5525 
  CEM 2060 SOLID TYPE ~6.0080.009.006.0030.0~C ~0.00~0.0200.0502~71E01A05D27A8 ~44.00~6337186 2 UF10 TT5525 
  CEM 2080 SOLID TYPE ~8.0090.0012.008.0030.0~C ~0.00~0.0300.0702~71E01A05D27A8 ~54.00~6337185 2 UF10 TT5525 
  CEM 2100 SOLID TYPE ~10.00100.0015.0010.0030.0~C ~0.00~0.0300.1002~71E01A05D27A8 ~60.00~6230022 2 UF10 TT5525 
  CEM 2120 SOLID TYPE ~12.00110.0018.0012.0030.0~C ~0.00~0.0400.1002~71E01A05D27A8 ~65.00~6230023 2 UF10 TT5525 
  CEM 2160 SOLID TYPE ~16.00125.0024.0016.0030.0~C ~0.00~0.0500.1002~71E01A05D27A8 ~77.00~6230024 2 UF10 TT5525 
  CEM 2200 SOLID TYPE ~20.00150.0030.0020.0030.0~C ~0.00~0.0500.1002~71E01A05D27A8 ~100.00~6230025 2 UF10 TT5525 


Site Map

Turning  Parting & Grooving  Thread Making  Hole Making  Reaming  Milling & Solid End mills  Tooling System  Boring System 

Any use of the Taegutec E-catalogue and any transactions which may be performed as a result of using this program are subject to Terms of Use and Legal Disclaimer   Privacy Statement
© 2021 TaeguTec LTD. Manufacturer of Metalworking Tools (TaeguTec.com) All Rights Reserved