× Login Information
Grade : TT5505
PVD AlTiN coated grade on ultra-fine substrate with high wear reistance and oxidation resistance for high speed machining of hardened steels and pre-hardened alloys of hardness under 65 HRC

PropertyValue
ISO Range - P/M/K(P05-P25)
ISO Range - H/S/N (H05-H25)

PropertyValue
Grade or Coating TypePVD
Coating Layers AlTiN
Grade ColorBROWN




Cutting Speed for: HSR 6060M 100 TT5505 - 6127482
ISOWorkpiece Material GroupMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB260-300 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB200-250 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered.250 HB160-230 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed220 HB160-230 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered.300 HB140-200 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed200 HB160-230 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered275 HB120-200 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered300 HB140-200 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered350 HB140-200 m/min
P10High alloyed steel, cast steel and tool steel.Annealed200 HB140-200 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered325 HB80-150 m/min
K15Grey cast iron (GG)Pearlitic/ferritic180 HB100-300 m/min
K16Grey cast iron (GG)Pearlitic/martensiti260 HB130-280 m/min
K17Nodular cast iron (GGG)Ferritic160 HB150-280 m/min
K18Nodular cast iron (GGG)Pearlitic250 HB90-280 m/min
K19Malleable cast iron.Ferritic130 HB150-280 m/min
K20Malleable cast iron.Pearlitic230 HB140-250 m/min
S31High temp. alloys Fe based.Annealed200 HB20-40 m/min
S32High temp. alloys Fe based.Cured280 HB20-30 m/min
S33High temp. alloys. Ni or Co based.Annealed250 HB20-30 m/min
S34High temp. alloys. Ni or Co based.Cured350 HB20-30 m/min
S35High temp. alloys. Ni or Co based.Castr320 HB30-80 m/min
H38Hardened steel.Hardened55 HRC30-60 m/min
H39Hardened steel.Hardened60 HRC30-40 m/min
H40Chilled cast iron.Cast400 HB70-90 m/min
H41Cast iron.Hardened55 HRC30-60 m/min

Site Map

Turning  Parting & Grooving  Thread Making  Hole Making  Reaming  Milling & Solid End mills  Tooling System  Boring System 

Any use of the Taegutec E-catalogue and any transactions which may be performed as a result of using this program are subject to Terms of Use and Legal Disclaimer   Privacy Statement
© 2021 TaeguTec LTD. Manufacturer of Metalworking Tools (TaeguTec.com) All Rights Reserved