× Login Information
Grade : TT8020
One of toughest PVD grade for turning, drilling grooving, parting-off and milling in medium and low speed machining of steels, stainless steels and heat resistant materials

PropertyValue
ISO Range - P/M/K(P30-P50)(M30-M50)
ISO Range - H/S/N (S30-S50)

PropertyValue
Grade or Coating TypePVD
Coating Layers TiCN
Grade ColorGRAY




Cutting Speed for: TDJ 3 TT8020 - 6000174
ISOWorkpiece Material GroupMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB80-150 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB100-150 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered.250 HB70-130 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed220 HB70-120 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered.300 HB60-100 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed200 HB80-120 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered275 HB70-130 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered300 HB70-110 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered350 HB60-100 m/min
P10High alloyed steel, cast steel and tool steel.Annealed200 HB80-110 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered325 HB40-60 m/min
M12Stainless steel and cast steel.Ferritic/martensitic200 HB70-130 m/min
M13Stainless steel and cast steel.Martensitic240 HB70-110 m/min
M14Stainless steel and cast steel.Austenitic180 HB70-130 m/min
S31High temp. alloys Fe based.Annealed200 HB20-30 m/min
S32High temp. alloys Fe based.Cured280 HB15-20 m/min
S33High temp. alloys. Ni or Co based.Annealed250 HB15-20 m/min
S34High temp. alloys. Ni or Co based.Cured350 HB15-20 m/min
S35High temp. alloys. Ni or Co based.Castr320 HB15-20 m/min
S36Titanium Ti alloys.310 HB80-100 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu310 HB15-30 m/min

Site Map

Turning  Parting & Grooving  Thread Making  Hole Making  Reaming  Milling & Solid End mills  Tooling System  Boring System 

Any use of the Taegutec E-catalogue and any transactions which may be performed as a result of using this program are subject to Terms of Use and Legal Disclaimer   Privacy Statement
© 2021 TaeguTec LTD. Manufacturer of Metalworking Tools (TaeguTec.com) All Rights Reserved