× Login Information
Grade : TT9030
PVD coated grade on submicron substrate for general machining of steels, stainless steels and heat-resistant alloys

PropertyValue
ISO Range - P/M/K(P20-P40)(M20-M40)
ISO Range - H/S/N (S20-S40)

PropertyValue
Grade or Coating TypePVD
Coating Layers TiAlN
Grade ColorBLACK




Cutting Speed for: MTECZ 1010D22 20UN TT9030 - 6346264
ISOWorkpiece Material GroupMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB100-250 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB80-210 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered.250 HB65-170 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed220 HB110-180 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered.300 HB95-160 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed200 HB90-160 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered275 HB65-200 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered300 HB70-210 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered350 HB95-160 m/min
P10High alloyed steel, cast steel and tool steel.Annealed200 HB130-170 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered325 HB75-100 m/min
M12Stainless steel and cast steel.Ferritic/martensitic200 HB110-170 m/min
M13Stainless steel and cast steel.Martensitic240 HB70-155 m/min
M14Stainless steel and cast steel.Austenitic180 HB85-100 m/min
K15Grey cast iron (GG)Pearlitic/ferritic180 HB70-150 m/min
K16Grey cast iron (GG)Pearlitic/martensiti260 HB110-140 m/min
K17Nodular cast iron (GGG)Ferritic160 HB120-160 m/min
K18Nodular cast iron (GGG)Pearlitic250 HB75-160 m/min
K19Malleable cast iron.Ferritic130 HB120-160 m/min
K20Malleable cast iron.Pearlitic230 HB110-140 m/min
N21Aluminum-wrought alloy.Not cureable60 HB160-300 m/min
N29Non metallic.Duro& fiber plastics60 HB100-400 m/min
S33High temp. alloys. Ni or Co based.Annealed250 HB20-80 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu310 HB20-80 m/min
H38Hardened steel.Hardened55 HRC55-65 m/min
H39Hardened steel.Hardened60 HRC45-55 m/min
H40Chilled cast iron.Cast400 HB90-105 m/min
H41Cast iron.Hardened55 HRC55-65 m/min

Site Map

Turning  Parting & Grooving  Thread Making  Hole Making  Reaming  Milling & Solid End mills  Tooling System  Boring System 

Any use of the Taegutec E-catalogue and any transactions which may be performed as a result of using this program are subject to Terms of Use and Legal Disclaimer   Privacy Statement
© 2021 TaeguTec LTD. Manufacturer of Metalworking Tools (TaeguTec.com) All Rights Reserved