Grade : TT9080
General machining of steels, stainless steels and heat-resistant steel Achieves excellent surface finish

PropertyValue
ISO Range - P/M/K(P20-P40)(M20-M40)
ISO Range - H/S/N (S20-S40)
HRA92
Coating TypePVD
Coating LayerAlTiN-TiN



Cutting Speed for: BLMP 0603R-M TT9080 - 5612719
ISOMaterialMaterial DescriptionMaterial ConditionCutting Speed Recommendations
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed :125220-370 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed :190180-310 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered. :250115-195 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed :220130-210 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered. :300115-175 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed :200175-265 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :275130-215 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :300105-185 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered :35095-160 m/min
P10High alloyed steel, cast steel and tool steel.Annealed :20085-155 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered :32575-135 m/min
M12Stainless steel and cast steel.Ferritic/martensitic :200115-270 m/min
M13Stainless steel and cast steel.Martensitic :240100-230 m/min
M14Stainless steel and cast steel.Austenitic :180120-275 m/min
K15Grey cast iron (GG)Pearlitic/ferritic :180130-300 m/min
K16Grey cast iron (GG)Pearlitic/martensiti :260120-280 m/min
K17Nodular cast iron (GGG)Ferritic :160110-220 m/min
K18Nodular cast iron (GGG)Pearlitic :250100-200 m/min
K19Malleable cast iron.Ferritic :130150-250 m/min
K20Malleable cast iron.Pearlitic :230100-250 m/min
S31High temp. alloys Fe based.Annealed :20040-80 m/min
S32High temp. alloys Fe based.Cured :28030-60 m/min
S33High temp. alloys. Ni or Co based.Annealed :25035-70 m/min
S34High temp. alloys. Ni or Co based.Cured :35030-60 m/min
S35High temp. alloys. Ni or Co based.Castr :32035-65 m/min
S36Titanium (pure):31090-130 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu :31035-75 m/min
H38Hardened steel.Hardened :56040-75 m/min
H39Hardened steel.Hardened :65430-55 m/min
H40Chilled cast iron.Cast :40070-105 m/min
H41Cast iron.Hardened :56050-65 m/min