× Login Information
Grade : TT9080
General machining of steels, stainless steels and heat-resistant steel Achieves excellent surface finish

PropertyValue
ISO Range - P/M/K(P20-P40)(M20-M40)
ISO Range - H/S/N (S20-S40)

PropertyValue
Grade or Coating TypePVD
Coating Layers AlTiN-TiN
Grade ColorYELLOW




Cutting Speed for: TSC 3 TT9080 - 6001120
ISOWorkpiece Material GroupMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB110-190 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB90-155 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered.250 HB85-175 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed220 HB75-150 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered.300 HB70-145 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed200 HB80-130 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered275 HB75-140 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered300 HB75-145 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered350 HB65-110 m/min
P10High alloyed steel, cast steel and tool steel.Annealed200 HB70-115 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered325 HB50-80 m/min
M12Stainless steel and cast steel.Ferritic/martensitic200 HB65-155 m/min
M13Stainless steel and cast steel.Martensitic240 HB75-150 m/min
M14Stainless steel and cast steel.Austenitic180 HB65-155 m/min
K15Grey cast iron (GG)Pearlitic/ferritic180 HB150-260 m/min
K16Grey cast iron (GG)Pearlitic/martensiti260 HB130-190 m/min
K17Nodular cast iron (GGG)Ferritic160 HB140-230 m/min
K18Nodular cast iron (GGG)Pearlitic250 HB110-180 m/min
K19Malleable cast iron.Ferritic130 HB170-270 m/min
K20Malleable cast iron.Pearlitic230 HB140-230 m/min
S31High temp. alloys Fe based.Annealed200 HB30-50 m/min
S32High temp. alloys Fe based.Cured280 HB20-40 m/min
S33High temp. alloys. Ni or Co based.Annealed250 HB20-30 m/min
S34High temp. alloys. Ni or Co based.Cured350 HB15-20 m/min
S35High temp. alloys. Ni or Co based.Castr320 HB15-20 m/min
S36Titanium Ti alloys.310 HB105-155 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu310 HB30-60 m/min

Site Map

Turning  Parting & Grooving  Thread Making  Hole Making  Reaming  Milling & Solid End mills  Tooling System  Boring System 

Any use of the Taegutec E-catalogue and any transactions which may be performed as a result of using this program are subject to Terms of Use and Legal Disclaimer   Privacy Statement
© 2021 TaeguTec LTD. Manufacturer of Metalworking Tools (TaeguTec.com) All Rights Reserved