× Login Information
Grade : UF10N
Ultra-fine grade with a high-toughnsee and wear re or solid carbide end mills Achieves excellent surface finish.

PropertyValue
ISO Range - P/M/K(P30-P50)(M15-M40)
ISO Range - H/S/N

PropertyValue
Grade or Coating TypeUN-COATED
Coating Layers Uncoated
Grade ColorMETAL




Cutting Speed for: SBE 4200 UF10N - 4105937
ISOWorkpiece Material GroupMaterial DesignationMaterial ConditionHardnessCutting Speed Recommendations (Vc)
P1Non-alloy steel and cast steel, free cutting steel <0.25%C.Annealed125 HB140-200 m/min
P2Non-alloy steel and cast steel, free cutting steel >=0.25%C.Annealed190 HB120-160 m/min
P3Non-alloy steel and cast steel, free cutting steel <0.55%C.Quench and tempered.250 HB100-150 m/min
P4Non-alloy steel and cast steel, free cutting steel >=0.55%C.Annealed220 HB100-140 m/min
P5Non-alloy steel and cast steel, free cutting steel >=0.55%C.Quenched & tempered.300 HB90-130 m/min
P6Low alloy & cast steel (less than 5% of alloying elements).Annealed200 HB110-150 m/min
P7Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered275 HB80-130 m/min
P8Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered300 HB90-130 m/min
P9Low alloy & cast steel (less than 5% of alloying elements).Quenched & tempered350 HB100-130 m/min
P10High alloyed steel, cast steel and tool steel.Annealed200 HB90-130 m/min
P11High alloyed steel, cast steel and tool steel.Quenched & tempered325 HB50-80 m/min
M12Stainless steel and cast steel.Ferritic/martensitic200 HB60-110 m/min
M13Stainless steel and cast steel.Martensitic240 HB40-100 m/min
M14Stainless steel and cast steel.Austenitic180 HB40-80 m/min
K15Grey cast iron (GG)Pearlitic/ferritic180 HB60-180 m/min
K16Grey cast iron (GG)Pearlitic/martensiti260 HB90-170 m/min
K17Nodular cast iron (GGG)Ferritic160 HB100-200 m/min
K18Nodular cast iron (GGG)Pearlitic250 HB60-200 m/min
K19Malleable cast iron.Ferritic130 HB100-200 m/min
K20Malleable cast iron.Pearlitic230 HB100-170 m/min
N21Aluminum-wrought alloy.Not cureable60 HB800-900 m/min
N22Aluminum-wrought alloy.Cured100 HB700-800 m/min
N23Aluminum-cast, alloyed <12% Si.Not cureable75 HB800-900 m/min
N24Aluminum-cast, alloyed.Cured90 HB750-850 m/min
N25Aluminum-cast, alloyed >12% Si.High temperature130 HB400-450 m/min
N26Copper alloys >1% pb.Free cutting110 HB500-550 m/min
N27Copper alloys.Brass90 HB500-550 m/min
N28Copper alloys.Electrolitic copper100 HB350-380 m/min
S31High temp. alloys Fe based.Annealed200 HB10-20 m/min
S32High temp. alloys Fe based.Cured280 HB10-20 m/min
S33High temp. alloys. Ni or Co based.Annealed250 HB20-50 m/min
S34High temp. alloys. Ni or Co based.Cured350 HB20-50 m/min
S35High temp. alloys. Ni or Co based.Castr320 HB20-50 m/min
S36Titanium Ti alloys.310 HB20-30 m/min
S37Titanium Ti alloys.Alpha+beta alloys cu310 HB20-30 m/min
H38Hardened steel.Hardened55 HRC40-60 m/min
H39Hardened steel.Hardened60 HRC20-30 m/min
H40Chilled cast iron.Cast400 HB65-75 m/min
H41Cast iron.Hardened55 HRC40-45 m/min

Site Map

Turning  Parting & Grooving  Thread Making  Hole Making  Reaming  Milling & Solid End mills  Tooling System  Boring System 

Any use of the Taegutec E-catalogue and any transactions which may be performed as a result of using this program are subject to Terms of Use and Legal Disclaimer   Privacy Statement
© 2021 TaeguTec LTD. Manufacturer of Metalworking Tools (TaeguTec.com) All Rights Reserved