CRH 4
4 Flute High Feed Ceramic end mills for high speed machining of superalloys

4N TE9004
90° End mills with uniques four high positive helical cutting edges of doublesided 4NKT 04 inserts

4N TE90M04
90° Modular end mills with TFLEXTEC adaptation & four high positive helical cutting edges of doublesided 4NKT 04

4N TE90S04
90° Modular end mills with MAXIRUSH adaptation & unique four high positive helical cutting edges of doublesided 4NKT 04

4N TF90R04
90° Face mills with unique four high positive helical cutting edges of doublesided 4NKT 04 inserts

4N TE9006
90° End mills with unique 4 high positive helical cutting edges of doublesided 4NK(H)T 06 inserts

4N TE90M06
90° Modular end mills with TFLEXTEC adaptation & four high positive helical cutting edges of doublesided 4NK(H)T 06

4N TF90R06
90° Face mills with unique 4 high positive helical cutting edges of doublesided 4NK(H)T 06 inserts

4N TE9009
90° End mills with unique four high positive helical cutting edges of doublesided 4NK(H)T 09 inserts

4N TE90M09
90° Modular end mills with TFLEXTEC adaptation & four high positive helical cutting edges of doublesided 4NK(H)T 09

4N TF90R09
90° Face mills with unique four high positive helical cutting edges of doublesided 4NK(H)T 09 inserts

4N TE9011
90° End mills with unique four high positive helical cutting edges of doublesided 4NKT 11 inserts

4N TE90M11
90° Modular end mills with TFLEXTEC adaptation & four high positive helical cutting edges of doublesided 4NKT 11

4N TF90R11
90° Face mills with unique four high positive helical cutting edges of doublesided 4NKT 11 inserts

4N TE9014
90° End mills with unique four high positive helical cutting edges of doublesided 4NKT 14 inserts

4N TE90M14
90° Modular end mills with TFLEXTEC adaptation & four high positive helical cutting edges of doublesided 4NKT 14

4N TF90R14
90° Face mills with unique four high positive helical cutting edges of doublesided 4NKT 14 inserts

2PTE9005
90° End mills with 2PKT inserts of high positive helical cutting edges

2PTE90M05
90° Modular end mills with TFLEXTEC adaptation & high positive helical cutting edges of 2PKT inserts

2PTF90R05
90° Face mills with 2PKT inserts of high positive helical cutting edges

2PTE9007
90° End mills with 2PKT inserts of high positive helical cutting edges

2PTE90M07
90° Modular end mills with TFLEXTEC adaptation & high positive helical cutting edges of 2PKT inserts

2PTF90R07
90° Face mills with 2PKT inserts of high positive helical cutting edges

TE90XEV16/22
90° End mills with XEVT 16/22 inserts of very high positive rake angle & helical cutting edges for aluminum machining

TE90XEVM16
90° Modular end mills with TFLEXTEC adaptation & high positive 2 helical cutting edges of XEVT for aluminum

TFM90XEVR16/22
90° Face mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining

TE90XEVHSK63A16
90° End mills with HSK 63 shank & high positive rake angle & two helical cutting edges of XEVT 16 for aluminum machining

TDM06
Drilling & milling end mills with XOMT 06 inserts

TDM09/11/14
Drilling & milling end mills with SPMT and SPMG 09/11/14 milling inserts

TNFR
End mill holders for finishing with corner radius inserts of NFR and cylindrical steel shank

TNFR...CTL...
End mill holders for finishing with corner radius inserts of NFR and carbide shank of better rigidity

TNFRM
Modular end mill holders dedicated for corner R of NFR and finishing operations with TFLEXTEC adaptations

TE90XE16
90° End mills with XECT 16 of very high positive rake angle & helical cutting edges for aluminum machining

TE90XEM16
90° Modular end mills with TFLEXTEC adaptation & high positive 2 helical cutting edges of XECT 16 for aluminum

TFM90XER16
90° Face mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining

HFM 2 (2 Flute)
High feed type solid carbide end mills with 2 flute for roughing

HFM 4 (4 Flute)
High feed type solid carbide end mills with 4 flute for roughing

HSF 2 (0.34.0)
High precision solid carbide end mills of flat type with long neck & 2 flute for HSM of hardened steel

HSF 2...M (0.35.0)
High precision solid carbide end mills of flat type with medium length & 2 flute for HSM of hardened steel

HSF 2 (5.012.0)
High precision solid carbide end mills of flat type with long neck & 2 flute for HSM of hardened steel

HSF 2...M (6.012.0)
High precision solid carbide end mills of flat type with medium length & 2 flute for HSM of hardened steel

HSF 4 (1.05.0)
High precision solid carbide end mills of flat type with long neck & 4 flute for HSM of hardened steel

HSF 4...M (1.011.0)
High precision solid carbide end mills of flat type with medium length & 4 flute for HSM of hardened steel

HSF 4 (6.012.0)
High precision solid carbide end mills of flat type with long neck & 4 flute for HSM of hardened steel

HSF 4...M (6.012.0)
High precision solid carbide end mills of flat type with medium length & 4 flute for HSM of hardened steel

HSR 2 (0.34.0)
High precision solid carbide end mills of corner R type with long neck & 2 flute for HSM of hardened steel

HSR 2...M (0.34.0)
High precision solid carbide end mills of corner R type with medium length & 2 flute for HSM of hardened steel

HSR 2 (6.012.0)
High precision solid carbide end mills of corner R type with long neck & 2 flute for HSM of hardened steel

HSR 2...M (6.012.0)
High precision solid carbide end mills of corner R type with medium length & 2 flute for HSM of hardened steel

HSR 4 (1.04.0)
High precision solid carbide end mills of corner R type with long neck & 4 flute for HSM of hardened steel

HSR 4...M (1.04.0)
High precision solid carbide end mills of corner R type with medium length & 4 flute for HSM of hardened steel

HSR 4 (6.012.0)
High precision solid carbide end mills of corner R type with long neck & 4 flute for HSM of hardened steel

HSR 4...M (6.012.0)
High precision solid carbide end mills of corner R type with medium length & 4 flute for HSM of hardened steel

TSE 2...M
Solid carbide end mills with flat type & medium & 2 flute for general purpose

TSE 2...MUNCOATED
Solid carbide end mills with flat type & medium & 2 flute for general purpose

TSE 4...M
Solid carbide end mills with flat type & medium & 4 flute for general purpose

TSE 4...MUNCOATED
Solid carbide end mills with flat type & medium & 4 flute for general purpose

HES 2...LT
Solid carbide end mills with long cutting length & 2 flute for general purpose

HES 2...XLT
Solid carbide end mills with extra long cutting length & 2 flute for general purpose

HES 2...TR
Solid carbide end mills of corner R type with medium & 2 flute for general purpose

HES 2...LTR
Solid carbide end mills of corner R type with long & 2 flute for general purpose

HES 4...LT
Solid carbide end mills with long cutting length & 4 flute for general purpose

HES 4...XLT
Solid carbide end mills with extra long cutting length & 4 flute for general purpose

HES 4...TR
Solid carbide end mills of corner R type with medium & 4 flute for general purpose

HES 4...LTR
Solid carbide end mills of corner R type with long & 4 flute for general purpose

HMF 2
Miniature solid carbide end mills of flat type with two flute for high speed machining

CFM 4...M
4 Flute solid carbide end mills with unequal spacing of cutting edges for less vibration

REL ...L
Solid carbide roughing end mills with serrated cutting edges & long & 34 flute & corner chamfer for hardened steels

FSM 4_M
4 Flute solid carbide end mills with alternated serrated & normal cutting edges in one tool for higher productivity

EFE 2...S
Economical 2 flute solid carbide end mills with flat & short type for general purpose

EFE 2...M
Economical 2 flute solid carbide end mills with flat & medium type for general purpose

EFE 2...L
Economical 2 flute solid carbide end mills with flat & long type for general purpose

EFE 3...S
Economical 3 flute solid carbide end mills with flat & short type for general purpose

EFE 3...M
Economical 3 flute solid carbide end mills with flat & medium type for general purpose

EFE 4...M
Economical 4 flute solid carbide end mills with flat & medium type for general purpose

EFE 4...L
Economical 4 flute solid carbide end mills with flat & long type for general purpose

SED 4...U
4 Flute solid carbide end mills for difficulttocut materials with flat type & unequal spaced cutting edges

SED 4...UL
4 Flute solid carbide end mills for difficulttocut materials with long flat type & unequal spaced cutting edges

SED 4...UR
4 Flute solid carbide end mills for difficulttocut materials with corner R & unequal spaced cutting edges

SED 4...UC
4 Flute solid carbide end mills for difficulttocut materials with chamfer & unequal spaced cutting edges

REH ...S
Solid carbide roughing end mills with serrated cutting edges & short & corner chamfer & 46 flute for low hardness parts

REH ...M
Solid carbide roughing end mills with serrated cutting edges & medium & 36 flute & corner chamfer for low hardness part

REH ...L
Solid carbide roughing end mills with serrated cutting edges & long & corner chamfer & 46 flute for low hardness parts

AES 2
2 Flute solid carbide end mills of medium length type for aluminum machining

AES 2..XL
2 Flute solid carbide end mills of extra long length type for aluminum machining

AES 2..R
2 Flute solid carbide end mills of medium length type with corner R for aluminum machining

AES 3
3 Flute solid carbide end mills of medium length type for aluminum machining

AES 3..XL
3 Flute solid carbide end mills of extra long length type for aluminum machining

AES 3..R
3 Flute solid carbide end mills of medium length type with corner R for aluminum machining

AES 3..ML
3 Flute solid carbide end mills of long length type for aluminum machining

AWE 3
Solid carbide end mills for aluminum with waved cutting edges & variable helix angles without vibration

AWE 3..ML
Solid carbide end mills for aluminum with long waved cutting edges & variable helix angles without vibration

REMA 3..(C)
Solid carbide end mills with shredded cutting edges for aluminum roughing with 3 flute & small corner R

REA 3...L
Solid carbide end mills with shredded cutting edges for aluminum roughing with 3 flute & small chamfer

DER 3...S
Solid Carbide Endmills, Corner Radius, 3 Flutes, 40 Helix

DER 3...L
Diamond coated 3 flute solid carbide end mills of corner R type for graphite machining

DMR 2
Solid Carbide Endmills, Corner Radius, 2 Flutes, 30 Helix

RRFE
Splitter router end mills for roughing of composite material in high productivity with less cutting force

RCFE
Multi flute router end mills for roughing of composite materials in high productivity by low cutting force

MXEE(D)04
Interchangeable Solid carbide Flat type end mill heads with 4 flute & various corner radii for general purpose

MXEE03 (H.A 38, keyways)
Interchangeable solid carbide flat type end mill heads with 3 flute for keyways

MXEE03 (H.A 45, general)
Interchangeable solid carbide flat type end mill heads with 3 flute for general purpose

MXEEA02
Interchangeable solid carbide Flat type end mill heads with 2 flute & various corner radii for Aluminum machining

MXEEA03
Interchangeable solid carbide Flat type end mill heads with 3 flute & various corner radii for Aluminum machining

MXEEC04
Interchangeable solid carbide flat type end mill heads with 4 flute of alternated serrated & normal cutting edges

MXEEI04
Interchangeable solid carbide flat type end mill heads with 4 flute unequal spacing of cutting edges for less vibration

MXEER
Interchangeable solid carbide flat type roughing end mill heads with serrated cutting edges

MXFX02 (High feed)
Interchangeable solid carbide High Feed mill heads with 2 flute

MXRB02
Interchangeable solid carbide Torodial end mill heads with 2 flute & 7° relief angle

MXRD06
Interchangeable solid carbide end mill heads with 6 flute, big corner radius & 7° relief angle
 