TEBLS04
High feed end mills with BLMP 04 inserts of 4 cutting edges and MAXIRUSH modular adaptations in max. ap 0.5 mm

TEBLM04
High feed end mills with BLMP 04 inserts of 4 cutting edges and TFLEXTEC modular adaptations in max. ap 0.5 mm

TEBL04
High feed end mills with BLMP 04 inserts of 4 cutting edges in maximum depth of cut ap 0.5 mm

TEPT05
High Feed end mills with PTKU 05 inserts of economical 10 cutting edges in maximum depth of cut ap 1.5 mm

TEPTM05
High feed end mills with PTKU 05 inserts of 10 cutting edges & TFLEXTEC modular adaptation in max. ap 1.5 mm

TFMPTR05
High Feed mills with PTKU 05 inserts of economical 10 cutting edges in maximum depth of cut ap 1.5 mm

THFN
Nano High Feed end mills with High Feed HFN inserts & internal coolant for miniature components

THFNCT
Nano High Feed end mills with High Feed HFN inserts & carbide shank for better rigidity & miniature components

MXFX02
Interchangeable solid carbide High Feed mill heads with 2 flute

MXBD(E)BG04
Interchangeable solid carbide Ball nose mill heads with 4 flute for high precision machining

MXBDBG02
Interchangeable solid carbide Ball nose mill heads with 2 flute for high precision machining

TEBLM11
High feed end mills with BLMP 11 inserts of 4 cutting edges and TFLEXTEC modular adaptations in max. ap 2.0 mm

TEBL11
High feed end mills with BLMP 11 inserts of 4 cutting edges in maximum depth of cut ap 2.0 mm

TFMBLR11
High feed mills with BLMP 11 inserts of 4 cutting edges in maximum depth of cut ap 2.0 mm

TFMPTR10
High Feed mills with PTKU 10 inserts of economical 10 cutting edges in maximum depth of cut ap 3.0 mm

TEPTM10
High feed end mills with PTKU 10 inserts of 10 cutting edges & TFLEXTEC modular adaptation in max. ap 3.0 mm

TEPT10
High feed end mills with PTKU 10 inserts of economical 10 cutting edges in maximum depth of cut ap 3.0 mm

CRF 4
4 Flute Ceramic end mills with corner R and unequal spacing of cutting edges for machining of superalloys in less vib.

CRF 6
6 Flute Ceramic end mills with corner R and unequal spacing of cutting edges for machining of superalloys in less vib.

CRH 4
4 Flute High Feed Ceramic end mills for high speed machining of superalloys

TFMBNR12
High Feed mills with negative Ceramic inserts of 6 cutting edges & air holes for high speed machining of super alloys

TEBN09CH
High Feed end mills with Dimple negative Ceramic inserts four cutting edges for high speed machining of super alloys

TFMBNR09CH
High Feed mills with Dimple negative Ceramic inserts of four cutting edges for high speed machining of super alloys

TERNS10/12/16
End mills with doublesided round inserts of RNMU for general and Die & Mold application

TERNSM10/12/16
Modular end mills with TFLEXTEC adaptation and doublesided round inserts of RUMU for general profiling

TFMRNSR10/12/16
Face mills with doublesided round inserts for general applications and various industries

TERY08/10/12/16/20
End mills with strong positive round inserts of RYM(H)X for general profiling

TFMRYR08/10/12/16/20
Face mills with strong positive round inserts of RYM(H)X for general profiling & general machining

TFMRY HR16/20
Carbide shim type face mills with strong positive round inserts of RYM(H)X for general profiling & general machining

TERYM08/10/12/16
Modular end mills with TFLEXTEC adaptation and strong positive round inserts of RYM(H)X for profiling

2F 16/20/25/30/32M
Ball nose end mills for rough or semifinish profiling with TFLEXTEC modular adaptation with one insert of both sides

2F 16/20/25/30/32
Ball nose end mills for rough or semifinish profiling with one insert 2FB of both internal & external pockets

3F 50CN
Three effective ball nose end mills with combination shank & unique doublesided inserts of 3FB for high productivity

3F 32/50W
Three effective ball nose end mills with weldon shank and unique doublessided inserts of 3FB for higher productivity

TDB50XWT
WT shnak type holders with 6RBE 50M inserts for rough ball tools

TDB50XCN
Combination shank type holders with 6RBE 50M inserts for rough ball tools

TDB50XW
Weldon shank type holders with 6RBE 50M inserts for rough ball tools

TESB...M13
High feed end mills with TFLEXTEC modular adaptation and positive SBMT 13 of 4 cutting edges in max. ap 2.0 mm

TESB...13L
High feed end mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm

TESB...M...09
High feed end mills with TFLEXTEC modular adaptation and positive SBMT 09 of 4 cutting edges in max. ap 1.2 mm

TESB09L
High feed end mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm

TFMSB...R13
High feed face mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm

TFMSBR09
High feed face mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm

TEBL...M...13
High feed end mills with BLMP 13 inserts of 6 cutting edges and TFLEXTEC modular adaptations in max. Ap 2.0 mm

TEBL13L
High feed end mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm

TFMBLR13
High feed face mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm

TEBL09
High feed end mills with BLMP 09 inserts of 4 cutting edges in maximum depth of cut 1.5 mm

TEBL06
High feed end mills with BLMP 06 inserts of 4 cutting edges in max. ap 1.0 mm

TEBL...M...06
High feed end mills with BLMP 06 inserts of 4 cutting edges and TFLEXTEC modular adaptations in max. ap 1.0 mm

TEBL...M...09
High feed end mills with BLMP 09 inserts of 4 cutting edges and TFLEXTEC modular adaptation in max. ap 1.5 mm

TFMBLR06
High feed mills with BLMP 06 inserts of 4 cutting edges in maximum depth of cut ap 1.0 mm

TFMBLR09
High feed mills with BLMP 09 inserts of 4 cutting edges in maximum depth of cut ap 1.5 mm

TFMRNR12CH
Face mills with dimple type negative round Ceramic inserts for machining of nickel based superalloy & ductile cast iron

TNF...CTL...
End mill holders for finishing applications with NFB & NFR inserts and carbide shank of better rigidity

TNF...M...
Modular end mill holders with TFLEXTEC adaptation and NFB or NFR inserts for finishing operations

TNF
End mill holders with cylindrical steel shank & NFB or NFR inserts for finishing operations

HSR 2...M (0.34.0)
High precision solid carbide end mills of corner R type with medium length & 2 flute for HSM of hardened steel

HSR 2...M (6.012.0)
High precision solid carbide end mills of corner R type with medium length & 2 flute for HSM of hardened steel

HSR 4...M (1.04.0)
High precision solid carbide end mills of corner R type with medium length & 4 flute for HSM of hardened steel

HSR 4...M (6.012.0)
High precision solid carbide end mills of corner R type with medium length & 4 flute for HSM of hardened steel

HSB 2 (0.35.0)
High precision solid carbide ball nose end mills with long neck & 2 flute for HSM of hardened steel

HSB 2 (6.012.0)
High precision solid carbide ball nose end mills with long neck & 2 flute for HSM of hardened steel

HSB 2...M
High precision solid carbide ball nose end mills of medium type & 2 flute for HSM of hardened steel

HSB 2...S
High precision solid carbide ball nose end mills of short type with 2 flute for HSM of hardened steel

HSB 2...S6
High precision solid carbide ball nose end mills with long neck & 2 flute & 6.0 mm shank for HSM of hardened steel

HSB 4...M
High precision solid carbide ball nose end mills of medium type & 4 flute for HSM of hardened steel

HSR 2 (0.34.0)
High precision solid carbide end mills of corner R type with long neck & 2 flute for HSM of hardened steel

HSR 2 (6.012.0)
High precision solid carbide end mills of corner R type with long neck & 2 flute for HSM of hardened steel

HSR 6
High precision solid carbide end mills of corner R type with long neck & 6 flute for finishing of hardened steel

HSR 6...M
High precision solid carbide end mills of corner R type with medium length & 6 flute for finishing of hardened steel

HSR 4 (1.04.0)
High precision solid carbide end mills of corner R type with long neck & 4 flute for HSM of hardened steel

HSR 4 (6.012.0)
High precision solid carbide end mills of corner R type with long neck & 4 flute for HSM of hardened steel

HFM 2***
High feed type solid carbide end mills with 2 flute for roughing

HFM 4***
High feed type solid carbide end mills with 4 flute for roughing

BES 2___T
Solid carbide Spherical ball nose end mills with 2 flute for profiling

BES 4___T
Solid carbide Spherical ball nose end mills with 4 flute for profiling

SBO 2___T
Solid carbide ball nose end mills with coolant holes & 2 flute for profiling

SBE 4___
Solid carbide ball nose end mills with 4 flute & medium type for general application

SBE 4___T
Solid carbide ball nose end mills with 4 flute & medium type for general application

SBE 2___
Solid carbide ball nose end mills with 2 flute & medium type for general application

SBE 2___L
Solid carbide ball nose end mills with 2 flute & long type for general application

SBE 2___LT
Solid carbide ball nose end mills with 2 flute & long type for general application

SBE 2___S
Solid carbide ball nose end mills with 2 flute & short type for general application

SBE 2___T
Solid carbide ball nose end mills with 2 flute & medium type for general application

AEB 2___S
Solid carbide ball nose end mills for aluminum machining with short cutting length & 2 flute

AEB 3___M
Solid carbide ball nose end mills for aluminum machining with medium cutting length & 3 flute

SMB 2___3
Solid carbide ball nose end mills in minature type with two flute

DMB 2___
Solid carbide ball nose end mills of miniature type with 2 flute and diamond coating for graphite machining

DEB 2___L
Solid carbide ball nose end mills with long & 2 flute for graphite machining

DER 3..L
Diamond coated 3 flute solid carbide end mills of corner R type for graphite machining

DEB 2___S
Solid carbide ball nose end mills with diamond coating & short & 2 flute for graphite machining

REB____L
Solid carbide roughing ball nose end mills with long serrated cutting edges & 34 flute

TFM43OFSR05
43° Face mills with high positive octagon inserts & simple screw clamping for general milling

SBT 3***U
Solid carbide ball nose end mills for difficulttocut materials with unequal spacing of cutting edges & 3 flute

TFM43ZOFWR07
Wedge clamping type 43° Face mills with positive octagon inserts

SBT 4***U
Solid carbide ball nose end mills for difficulttocut materials with unequal spacing of cutting edges & 4 flute

TFMRXR20
Face mills with positive round inserts of RXM(H)X for general profiling

TFMRXR10/12/16
Face mills with positive round inserts of RXM(H)X for general profiling & general machining

TERXM10/12/16
Modular end mills with TFLEXTEC adaptation & positive round inserts for profiling

TERX10/12/16/20
End mills with positive round inserts of RXM(H)X for general profiling

HES 4___LTR
Solid carbide end mills of corner R type with long & 4 flute for general purpose

HES 2___LTR
Solid carbide end mills of corner R type with long & 2 flute for general purpose

HES 4___TR__
Solid carbide end mills of corner R type with medium & 4 flute for general purpose

HES 2___TR__
Solid carbide end mills of corner R type with medium & 2 flute for general purpose

TERD05/07
End mills with positive round inserts for profiling and milling of round corners

TERDM05/07
Modular end mills with TFLEXTEC adaptation & positive round inserts for profiling

AMR 6___TR__
Solid carbide end mills of corner R type with long neck and 6 flute for HSM of hardened steel

AMR 4___TR__
Solid carbide end mills of corner R type with long neck and 4 flute for HSM of hardened steel

AMR 2___TR__
Solid carbide end mills of corner R type with long neck and 2 flute for HSM of hardened steel

AMB 2___T
Solid carbide ball nose end mills with long neck & 2 flute for HSM of hardened steel

EBE 2...L
Solid carbide ball nose end mills with long & economical type & 2 flute for general purpose

EBE 2...M
Solid carbide ball nose end mills with medium & economical type & 2 flute for general purpose

EBE 2...S
Solid carbide ball nose end mills with short & economical type & 2 flute for general purpose

TERPW12CH
End mills with dimple type positive round Ceramic inserts for nickel based super alloy & ductile cast iron

RIB 2___
Solid carbide ball nose end mills with long neck & 2 flute for HSM of hardened steel (Rib processing)

TEXD08
High feed end mills with XDMX 08 inserts of 2 cutting edges

TEXD13
High feed end mills with XDMX 13 inserts of 2 cutting edges

TEXDM08/13
High feed modular end mills with XDMX inserts of 2 cutting edges & TFLEXTEC adaptations

TFMXDRO8
High feed face mills with XDMX 08 inserts of 2 cutting edges & maximum depth of cut 1.0 mm

TFMXDR13
High feed face mills with XDMX 13 inserts of 2 cutting edges & maximum depth of cut 2.0 mm
