Milling & Solid End mills
Ramp Down


TERP-09
End mills with positive round RPGN 09 ceramic inserts & clamp for high speed profiling of super alloys


TERP-12
End mills with positive RPGN 12 ceramic inserts & wedge clamp with air hole for high speed profiling of super alloys


TFMRP-R-12
Face mills with positive RPGN 12 ceramic inserts & wedge clamp with air hole for high speed milling of super alloys


TFMRN-R-1207
Face mills with negative RNGN 12 ceramic inserts & wedge clamp with air hole for high speed milling of super alloys


MXEE-03
Interchangeable solid carbide flat type end mill heads with 3 flute for general purpose


MXEE(D)-04
Interchangeable Solid carbide Flat type end mill heads with 4 flute & various corner radii for general purpose


MXEE-I04
Interchangeable solid carbide flat type end mill heads with 4 flute unequal spacing of cutting edges for less vibration


MXEE-R
Interchangeable solid carbide flat type roughing end mill heads with serrated cutting edges


MXEE-C04
Interchangeable solid carbide flat type end mill heads with 4 flute of alternated serrated & normal cutting edges


MXEE(D)-06
Interchangeable solid carbide Flat type end mill heads with 6 flute & various corner R for difficult-to-cut materials


MXED-08
Interchangeable Solid carbide flat type end mill heads with 8 flute & various corner R for difficult-to-cut materials


MXFX-02
Interchangeable solid carbide High Feed mill heads with 2 flute


TFMBL-R-11
High feed mills with BLMP 11 inserts of 4 cutting edges in maximum depth of cut ap 2.0 mm


CRF 4
4 Flute Ceramic end mills with corner R and unequal spacing of cutting edges for machining of superalloys in less vib.


CRF 6
6 Flute Ceramic end mills with corner R and unequal spacing of cutting edges for machining of superalloys in less vib.


CRH 4
4 Flute High Feed Ceramic end mills for high speed machining of superalloys


4N TF90-R-04
90° Face mills with unique four high positive helical cutting edges of double-sided 4NKT 04 inserts


4N TF90-R-09
90° Face mills with unique four high positive helical cutting edges of double-sided 4NK(H)T 09 inserts


4N TF90-R-11
90° Face mills with unique four high positive helical cutting edges of double-sided 4NKT 11 inserts


4N TF90-R-14
90° Face mills with unique four high positive helical cutting edges of double-sided 4NKT 14 inserts


THFN
Nano High Feed end mills with High Feed HFN inserts & internal coolant for miniature components


THFN-CT
Nano High Feed end mills with High Feed HFN inserts & carbide shank for better rigidity & miniature components


TFMBN-R-09CH
High Feed mills with Dimple negative Ceramic inserts of four cutting edges for high speed machining of super alloys


TEBN-09CH
High Feed end mills with Dimple negative Ceramic inserts four cutting edges for high speed machining of super alloys


TFMBN-R-12
High Feed mills with negative Ceramic inserts of 6 cutting edges & air holes for high speed machining of super alloys


4T-TF90-R-09
90° Face mills with strong four cutting edges of tangential LNK(H)U 09 inserts


4T-TF90-R-14
90° Face mills with strong four cutting edges of tangential LNKU 14 inserts


2P-TF90-R-07
90° Face mills with 2PKT inserts of high positive helical cutting edges


2P-TE90-M-05
90° Modular end mills with T-FLEXTEC adaptation & high positive helical cutting edges of 2PKT inserts


2P-TE90-05
90° End mills with 2PKT inserts of high positive helical cutting edges


2P-TF90-R-05
90° Face mills with 2PKT inserts of high positive helical cutting edges


4N TE90-M-06
90° Modular end mills with T-FLEXTEC adaptation & four high positive helical cutting edges of double-sided 4NK(H)T 06


4N TE90-06
90° End mills with unique 4 high positive helical cutting edges of double-sided 4NK(H)T 06 inserts


4N TF90-R-06
90° Face mills with unique 4 high positive helical cutting edges of double-sided 4NK(H)T 06 inserts


4N TE90-M-04
90° Modular end mills with T-FLEXTEC adaptation & four high positive helical cutting edges of double-sided 4NKT 04


4T-TE90-M-09
90° Modular end mills with T-FLEXTEC adaptation & strong four cutting edges of tangential LPK(H)U 09 inserts


4N TE90-M-09
90° Modular end mills with T-FLEXTEC adaptation & four high positive helical cutting edges of double-sided 4NK(H)T 09


4N TE90-M-11
90° Modular end mills with T-FLEXTEC adaptation & four high positive helical cutting edges of double-sided 4NKT 11


4N TE90-M-14
90° Modular end mills with T-FLEXTEC adaptation & four high positive helical cutting edges of double-sided 4NKT 14


4N TE90-S-04
90° Modular end mills with MAXIRUSH adaptation & unique four high positive helical cutting edges of double-sided 4NKT 04


3P TE90-M-04
90° Modular end mills with T-FLEXTEC adaptation & high positive three helical cutting edges of 3PKT 04 inserts


3P TE90-M-06
90° Modular end mills with T-FLEXTEC adaptation & high positive three helical cutting edges of 3PK(H)T 06 inserts


3P TE90-S-04
90° Modular end mills with MAXIRUSH adaptation & high positive three helical cutting edges of 3PKT 04 inserts


2S-TE90CV-M-05
End mills with T-FLEXTEC modular adaptation & unique high positive V shape inserts for shouldering & High Feed milling


2S-TE90CV-S-05
End mills with MAXIRUSH modular adaptation & unique high positive V shape inserts for shouldering & high feed milling


2P-TE90-M-07
90° Modular end mills with T-FLEXTEC adaptation & high positive helical cutting edges of 2PKT inserts


TEBL-M-04
High feed end mills with BLMP 04 inserts of 4 cutting edges and T-FLEXTEC modular adaptations in max. ap 0.5 mm


TEBL-M-11
High feed end mills with BLMP 11 inserts of 4 cutting edges and T-FLEXTEC modular adaptations in max. ap 2.0 mm


TEBL-S-04
High feed end mills with BLMP 04 inserts of 4 cutting edges and MAXIRUSH modular adaptations in max. ap 0.5 mm


TEBL-11
High feed end mills with BLMP 11 inserts of 4 cutting edges in maximum depth of cut ap 2.0 mm


TEBL-04
High feed end mills with BLMP 04 inserts of 4 cutting edges in maximum depth of cut ap 0.5 mm


2P-TE90-07
90° End mills with 2PKT inserts of high positive helical cutting edges


2S-TE90CV-05
End mills with unique high positive V shape inserts of two cutting edges for shouldering and high feed milling


3P TE90-04
90° End mills with high positive three helical cutting edges inserts of 3PKT 04


3P TE90-06
90° End mills with high positive three helical cutting edges inserts of 3PK(H)T 06


4N TE90-09
90° End mills with unique four high positive helical cutting edges of double-sided 4NK(H)T 09 inserts


4N TE90-11
90° End mills with unique four high positive helical cutting edges of double-sided 4NKT 11 inserts


4N TE90-14
90° End mills with unique four high positive helical cutting edges of double-sided 4NKT 14 inserts


4N TE90-04
90° End mills with uniques four high positive helical cutting edges of double-sided 4NKT 04 inserts


4T-TE90-09
90° End mills with strong 4 cutting edges of tangential LPK(H)U 09 inserts


3P TE90-M-10/15/19
90° Modular end mills with T-FLEXTEC adaptation & high positive three helical cutting edges of 3PK(H)T 10/15/19 inserts


3P TE90-10/15/19
90° End mills with high positive three helical cutting edges inserts of 3PK(H)T 10/15/19


2S-TE90AP-19
90° End mills with strong APKT 19 inserts for roughing of heavy industry parts & general applications


2S-TE90AP-09
90° End mills with high positive two helical cutting edges of APKT 09 inserts


2S-TE90AP-M-09
90° Modular end mills with T-FLEXTEC adaptation & high positive two helical cutting edges of APKT 09 inserts


TE90AP-M-12
90° Modular end mills with T-FLEXTEC adaptation & high positive two helical cutting edges of APKT 12 inserts


TE90AP-12
90° End mills with high positive two helical cutting edges of APKT 12 inserts


TE90AP-M-17
90° Modular end mills with T-FLEXTEC adaptation & high positive two helical cutting edges of AP.. 17 inserts


TE90AP-M-16
90° Modular end mills with T-FLEXTEC adaptation and RHINOMILL of APKT 16 inserts


TE90AP-17
90° End mills with high positive two helical cutting edges of AP.. 17 inserts


TE90AP-16
90° End mills with RHINOMILL of APKT 16 inserts


TE90AX-M-06
90° End mills with T-FLEXTEC modular adaptation & high positive two helical cutting edges of AXMT 06 inserts


TE90AX-06
90° End mills with high positive two helical cutting edges inserts of AXMT 06 for small part machining


TE90XEV-16/22
90° End mills with XEVT 16/22 inserts of very high positive rake angle & helical cutting edges for aluminum machining


TE90XEV-M-16
90° Modular end mills with T-FLEXTEC adaptation & high positive 2 helical cutting edges of XEVT for aluminum


TE90XEV-HSK63A-16
90° End mills with HSK 63 shank & high positive rake angle & two helical cutting edges of XEVT 16 for aluminum machining


TE90AN-M-16
90° Modular end mills with T-FLEXTEC adaptation & four helical cutting edges of double-sided inserts AN 16


TE90AN-16
90° End mills with four helical cutting edges of double-sided inserts AN 16


TE90AN-M-11
90° Modular end mills with T-FLEXTEC adaptation & four helical cutting edges of double-sided inserts AN 11


TE90AN-11
90° End mills with four helical cutting edges of double-sided inserts AN 11


TE90XE-M-16
90° Modular end mills with T-FLEXTEC adaptation & high positive 2 helical cutting edges of XECT 16 for aluminum


TE90XE-16
90° End mills with XECT 16 of very high positive rake angle & helical cutting edges for aluminum machining


TEBL...-M...-13
High feed end mills with BLMP 13 inserts of 6 cutting edges and T-FLEXTEC modular adaptations in max. Ap 2.0 mm


TEBL-13-L
High feed end mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm


TEBL...-M...-09
High feed end mills with BLMP 09 inserts of 4 cutting edges and T-FLEXTEC modular adaptation in max. ap 1.5 mm


TEBL-09
High feed end mills with BLMP 09 inserts of 4 cutting edges in maximum depth of cut 1.5 mm


TEBL...-M...-06
High feed end mills with BLMP 06 inserts of 4 cutting edges and T-FLEXTEC modular adaptations in max. ap 1.0 mm


TEBL-06
High feed end mills with BLMP 06 inserts of 4 cutting edges in max. ap 1.0 mm


TESB-09-L
High feed end mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm


TESB...-M...-09
High feed end mills with T-FLEXTEC modular adaptation and positive SBMT 09 of 4 cutting edges in max. ap 1.2 mm


TESB...-13-L
High feed end mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm


TESB...-M-13
High feed end mills with T-FLEXTEC modular adaptation and positive SBMT 13 of 4 cutting edges in max. ap 2.0 mm


7S-F45-R-06
45° Face mills with positive 7 cutting edged inserts & less cutting forces


TERT-M-10/12
Modular end mills with T-FLEXTEC adaptation & RTM(H)X inserts of five-indexing bottom for exotic materials


TERT-10
End mills with RTM(H)X inserts of five-indexing bottom for stainless steel and difficult-to-cut materials


TERY-08/10/12/16/20
End mills with strong positive round inserts of RYM(H)X for general profiling


TERY-M-08/10/12/16
Modular end mills with T-FLEXTEC adaptation and strong positive round inserts of RYM(H)X for profiling


TERNS-10/12/16
End mills with double-sided round inserts of RNMU for general and Die & Mold application


TERNS-M-10/12/16
Modular end mills with T-FLEXTEC adaptation and double-sided round inserts of RUMU for general profiling


TDM-06
Drilling & milling end mills with XOMT 06 inserts


TDM-09/11/14
Drilling & milling end mills with SPMT and SPMG 09/11/14 milling inserts


TNF
End mill holders with cylindrical steel shank & NFB or NFR inserts for finishing operations


TNF...-CT-L...
End mill holders for finishing applications with NFB & NFR inserts and carbide shank of better rigidity


TNF...-M...
Modular end mill holders with T-FLEXTEC adaptation and NFB or NFR inserts for finishing operations


TNFR
End mill holders for finishing with corner radius inserts of NFR and cylindrical steel shank


TNFR...-CT-L...
End mill holders for finishing with corner radius inserts of NFR and carbide shank of better rigidity


TNFR-M
Modular end mill holders dedicated for corner R of NFR and finishing operations with T-FLEXTEC adaptations


TFM43ZOFW-R-07
Wedge clamping type 43° Face mills with positive octagon inserts


TFM43OFS-R-05
43° Face mills with high positive octagon inserts & simple screw clamping for general milling


TFM90XEV-R-16/22
90° Face mills with very high positive rake angle & helical cutting edges inserts of XEVT 16/22 for aluminum machining


TFM90AP-R-17/17-B
90° Face mills with high positive two helical cutting edges inserts of AP.. 17


TFM90AP-R-12
90° Face mills with high positive two helical cutting edges inserts of APKT 12


TFM90AX-R-06
90° Face mills with high positive two helical cutting edges inserts of AXMT 06


TFMSB-R-09
High feed face mills with positive SBMT 09 inserts of four cutting edges in max. ap 1.2 mm


TFMSB...-R-13
High feed face mills with positive SBMT 13 inserts of four cutting edges in max. ap 2.0 mm


TFMBL-R-13
High feed face mills with BLMP 13 inserts of 6 cutting edges in max. ap 2.0 mm


TFMBL-R-09
High feed mills with BLMP 09 inserts of 4 cutting edges in maximum depth of cut ap 1.5 mm


TFMBL-R-06
High feed mills with BLMP 06 inserts of 4 cutting edges in maximum depth of cut ap 1.0 mm


TFMRT-10/12
Face mills with RTM(H)X inserts of five-indexing bottom for stainless steel and difficult-to-cut materials machining


TFMRY H-R-16/20
Carbide shim type face mills with strong positive round inserts of RYM(H)X for general profiling & general machining


TFMRY-R-08/10/12/16/20
Face mills with strong positive round inserts of RYM(H)X for general profiling & general machining


TFMRNS-R-10/12/16
Face mills with double-sided round inserts for general applications and various industries


TFMRX-R-10/12/16
Face mills with positive round inserts of RXM(H)X for general profiling & general machining


TFMRX-R-20
Face mills with positive round inserts of RXM(H)X for general profiling


2S-TFM90AP-R-19
90° Face mills with strong APKT 19 inserts for roughing of heavy industry parts


3P TF90-R-06
90° Face mills with high positive three helical cutting edges inserts of 3PK(H)T 06


3P TF90-R-10/15/19
90° Face mills with high positive three helical cutting edges inserts of 3PK(H)T 10/15/19


3P TF90-R-15/19(INCH BORE)
90° Face mills with high positive three helical cutting edges inserts of 3PK(H)T 10/15/19 & inch bores


2S-TFM90AP-R-09
90° Face mills with high positive two helical cutting edges of APKT 09 inserts


TFM90XE-R-16
90° Face mills with very high positive rake angle & helical cutting edges inserts of XECT 16 for aluminum machining


TDB50X-CN
Combination shank type holders with 6RBE 50-M inserts for rough ball tools


TDB50X-WT
WT shnak type holders with 6RBE 50-M inserts for rough ball tools


TDB50X-W
Weldon shank type holders with 6RBE 50-M inserts for rough ball tools


3F 50-CN
Three effective ball nose end mills with combination shank & unique double-sided inserts of 3FB for high productivity


2F 16/20/25/30/32-M
Ball nose end mills for rough or semi-finish profiling with T-FLEXTEC modular adaptation with one insert of both sides


2F 16/20/25/30/32
Ball nose end mills for rough or semi-finish profiling with one insert 2FB of both internal & external pockets


3F 32/50-W
Three effective ball nose end mills with weldon shank and unique doubles-sided inserts of 3FB for higher productivity


7S-E45-06
45° End mills with positive 7 cutting edged inserts & less cutting forces


HSB 2CBN
Solid CBN ball end mills for machining of high-hardness materials


SER
Solid carbide end mills of chip splitter type for roughing of difficult-to-cut materials with unequal cutting spacing


HSF 2 (0.3-4.0)
High precision solid carbide end mills of flat type with long neck & 2 flute for HSM of hardened steel


HSF 2 (5.0-12.0)
High precision solid carbide end mills of flat type with long neck & 2 flute for HSM of hardened steel


HSF 2...M (0.3-5.0)
High precision solid carbide end mills of flat type with medium length & 2 flute for HSM of hardened steel


HSF 4 (6.0-12.0)
High precision solid carbide end mills of flat type with long neck & 4 flute for HSM of hardened steel


HSF 4...M (1.0-11.0)
High precision solid carbide end mills of flat type with medium length & 4 flute for HSM of hardened steel


HSF 4...M (6.0-12.0)
High precision solid carbide end mills of flat type with medium length & 4 flute for HSM of hardened steel


HSF 6...M
High precision solid carbide end mills of flat type with medium length & 6 flute for finishing of hardened steel


HSF 6...XLT
High precision solid carbide end mills of flat type with extra long length & 6 flute for finishing of hardened steel


TSE 2...M
Solid carbide end mills with flat type & medium & 2 flute for general purpose


TSE 4...M
Solid carbide end mills with flat type & medium & 4 flute for general purpose


HES 2___LT
Solid carbide end mills with long cutting length & 2 flute for general purpose


HES 4___LT
Solid carbide end mills with long cutting length & 4 flute for general purpose


HES 2___XLT
Solid carbide end mills with extra long cutting length & 2 flute for general purpose


FSM 4_M
4 Flute solid carbide end mills with alternated serrated & normal cutting edges in one tool for higher productivity


HES 4___XLT
Solid carbide end mills with extra long cutting length & 4 flute for general purpose


HFM 2***
High feed type solid carbide end mills with 2 flute for roughing


HFM 4***
High feed type solid carbide end mills with 4 flute for roughing


CFM 4...M
4 Flute solid carbide end mills with unequal spacing of cutting edges for less vibration


TEPT-05
High Feed end mills with PTKU 05 inserts of economical 10 cutting edges in maximum depth of cut ap 1.5 mm


TEPT-10
High feed end mills with PTKU 10 inserts of economical 10 cutting edges in maximum depth of cut ap 3.0 mm


TEPT-M-05
High feed end mills with PTKU 05 inserts of 10 cutting edges & T-FLEXTEC modular adaptation in max. ap 1.5 mm


TEPT-M-10
High feed end mills with PTKU 10 inserts of 10 cutting edges & T-FLEXTEC modular adaptation in max. ap 3.0 mm


TFMPT-R-05
High Feed mills with PTKU 05 inserts of economical 10 cutting edges in maximum depth of cut ap 1.5 mm


TFMPT-R-10
High Feed mills with PTKU 10 inserts of economical 10 cutting edges in maximum depth of cut ap 3.0 mm